NFA photo thread
- Thread starter PTK
- Start date
Beretta686
New member
Here are a few of mine.
I will post more pictures at some point.
Serbu Super Shorty 12 guage AOW with holster
Semi-Auto Factory Colt AR15 in 9mm, registered SBR with 11.5" barrel. Above it is an LRM M169 suppressed upper. The 11.5" is so much fun, I hardly every shoot the suppressed upper. I would like to build another 9mm lower and register it as an SBR so I can have both uppers on a lower.
FR-8 shown with AAC 7.62SD suppressor. This carbine was issued with a flash suppressor that had the same thread pattern as HK. So, I just bought an AAC flash suppressor threaded for HK and it screwed right on. Suppressor screws right on AAC flash suppressor.
The Artillary Model Glock. Glock 34 registered as SBR with AAC Evo-9 suppressor. The stock and foregrip are a complete waste of money as is registering a pistol as an SBR. I tried the stock once, it is junk and impractical. I shoot the gun all the time as a suppressed pistol but the other junk stays on the shelf.
Full Auto Sterling. My only machinegun.
Ruger MK.IIs. Top one has like a 10" barrel. Threaded by Tornado Technologies. Can is a Tactial Innovations Quest. Next is an AAC Phoenix, integrally suppressed with holster from AAC. Finally is the Tactical Solutions upper: 4", Red, Fluted, Threaded. Can is TacInnov. TAC 65
I will post more pictures at some point.
Serbu Super Shorty 12 guage AOW with holster
Semi-Auto Factory Colt AR15 in 9mm, registered SBR with 11.5" barrel. Above it is an LRM M169 suppressed upper. The 11.5" is so much fun, I hardly every shoot the suppressed upper. I would like to build another 9mm lower and register it as an SBR so I can have both uppers on a lower.
FR-8 shown with AAC 7.62SD suppressor. This carbine was issued with a flash suppressor that had the same thread pattern as HK. So, I just bought an AAC flash suppressor threaded for HK and it screwed right on. Suppressor screws right on AAC flash suppressor.
The Artillary Model Glock. Glock 34 registered as SBR with AAC Evo-9 suppressor. The stock and foregrip are a complete waste of money as is registering a pistol as an SBR. I tried the stock once, it is junk and impractical. I shoot the gun all the time as a suppressed pistol but the other junk stays on the shelf.
Full Auto Sterling. My only machinegun.
Ruger MK.IIs. Top one has like a 10" barrel. Threaded by Tornado Technologies. Can is a Tactial Innovations Quest. Next is an AAC Phoenix, integrally suppressed with holster from AAC. Finally is the Tactical Solutions upper: 4", Red, Fluted, Threaded. Can is TacInnov. TAC 65
Last edited:
10/22 clone "Pocket Rifle". Volquertsen reciever, Kidd bolt & trigger, Butler Creek .920 barrel cut down and threaded by Tornado Technologies. Stock is obviously a Choate that was cut down by a guy I work with. Leupold Optic
Semi-Auto HK 91K clone. Registered SBR with 12" barrel. Shown with AAC 7.62SD suppressor.
7.62 x 39 Semi-Auto Krink: registered SBR
Semi-Auto Imbel FAL assembled on a DSA reciever. Shown with AAC 7.62SD suppressor.
Semi-Auto AR15 shown with AAC M4-2000 suppressor
CMP H&R .22 shown with Tactical Solutions TAC65 suppressor. Threaded done by Tornado Technolgies.
Semi-Auto HK 91K clone. Registered SBR with 12" barrel. Shown with AAC 7.62SD suppressor.
7.62 x 39 Semi-Auto Krink: registered SBR
Semi-Auto Imbel FAL assembled on a DSA reciever. Shown with AAC 7.62SD suppressor.
Semi-Auto AR15 shown with AAC M4-2000 suppressor
CMP H&R .22 shown with Tactical Solutions TAC65 suppressor. Threaded done by Tornado Technolgies.
Last edited:
Beretta686
New member
444: Uhhhhh.....wow........yeah.....wow.....
Here are a few more from me:
Shotgun group photo. Top shotgun is not an NFA weapon but I included it to give a relative size. I am not sure if it is 18" or 20" but it has a Vang Comp barrel. The next one is a 14" Vang Comp barrel. 13" Browning A5. And the 6 1/2" Serbu AOW.
Next we have another 10/22 clone: Volquertsen stainless reciever. Kidd bolt and trigger. Hogue stock. Leupold scope. Interally suppressed AAC Phoenix barrel.
Here is a Ruger 77 in .44 Mag. Suppressor was originally done by John's Guns. I bought this rifle used from Elite Iron. After I bought it, they rebuilt the suppressor and rebarreled the rifle because they wern't satisfied with it's accuracy. Scope is Leupold.
Here is the "Pocket Rifle" pictured earlier only this time the stock is opened and a suppressor has been screwed on.
Dark/Bad photo of an Armalite AR30 with AAC 7.62SD and Super Sniper scope (10X)
11.5" semi-auto AR15 registered SBR with AAC M4-2000 can
Shotgun group photo. Top shotgun is not an NFA weapon but I included it to give a relative size. I am not sure if it is 18" or 20" but it has a Vang Comp barrel. The next one is a 14" Vang Comp barrel. 13" Browning A5. And the 6 1/2" Serbu AOW.
Next we have another 10/22 clone: Volquertsen stainless reciever. Kidd bolt and trigger. Hogue stock. Leupold scope. Interally suppressed AAC Phoenix barrel.
Here is a Ruger 77 in .44 Mag. Suppressor was originally done by John's Guns. I bought this rifle used from Elite Iron. After I bought it, they rebuilt the suppressor and rebarreled the rifle because they wern't satisfied with it's accuracy. Scope is Leupold.
Here is the "Pocket Rifle" pictured earlier only this time the stock is opened and a suppressor has been screwed on.
Dark/Bad photo of an Armalite AR30 with AAC 7.62SD and Super Sniper scope (10X)
11.5" semi-auto AR15 registered SBR with AAC M4-2000 can
Last edited:
Singlesix1954
New member
BAR
All this stuff is realy cool. But I think the BAR is the sweetest thing on this thead. Just my $0.02
All this stuff is realy cool. But I think the BAR is the sweetest thing on this thead. Just my $0.02
