Smith and Wesson serial number search

serial numbers for a few of my guns

hey guys just found this site so im new but plan one staying around and helping as much as i can. i have a few ser#'s and models can someone reply with some info? thanks mike.first one is a 629-3 bef66xx other one for now is a 25-5 n8426xx thanks again for any help iding these
 
mikesbikesmalden:
Your 25-5 was made 1980-1983, serial number range for those years was N800000 to N899999. Your 629-3 was probably made in September 1989, BEDxxxx is recorded in August and BEKxxxx is recorded in October of that year.
 
Hi guys,

I wonder if you all could give me a hand with my two Smith revolvers. I'd love to know when they were made.

The first is a Smith and Wesson Third Model Double Action .38 Top Break, serial 201,XXX.

The second (and my newest, just got her yesterday) is a Smith and Wesson Model 1905 5th change .38 special, serial C 102,XXX. The C only appears on the butt with that serial, but not next to it like rifle serial numbers.

Thanks guys!
 
JGPrince: The .38 Double Action 3rd Model was manufactured between 1884 & 1895 in the serial number range 119001 to 322700. For an exact shipping date & address you would need to get a factory letter from Roy Jinks at S&W (cost $50.00).

The C prefix serial number was introduced in 1948 at C1, C223998 was used in 1951, so your gun falls somewhere in the middle. Per the standard Catalog of S&W you don't have model of 1905 fifth change, you have a .38 Military & Police (postwar) or Pre-Model 10, but that's just nit-picking.
 
Need some help identifying a S&W hand ejector revolver. Barrel marked "38 S&W SPECIAL CTG" 4 inch barrel with a 4 screw side plate. It has a mushroom shaped ejector. Serial number on bottom of the rounded handle is 304XXX but on the bottom of the barrel it is prefixed with either a small "R" or a small but not fully stamped "B" then 304XXX. Any ideas of the year and approximate value would be great. I'll try to attach two pics to show the condition.

7d47804d.jpg


8f592953.jpg


Thanks,
JHILDE
 
Last edited:
JHILDE: You have a S&W .38 Military & Police Model of 1905 4th change. Manufactured between 1915 & 1942 in the serial number range 241704-1000000, heat treated cylinders were introduced at serial number 316648. As yours is earlier than that it is probably safest if only shot with standard pressure loads. The grips are correct for the age of the gun, checkered walnut with gold monogram inserts and an un-checkered diamond around the grip screws. Square butts were available, but the round butt (like yours) was more common. The Standard Catalog of S&W notes that guns with serial numbers in the 500000 range shipped in 1927, so yours dates from somewhere between 1915 & 1927. Most of the bluing is missing, so condition would be fair to good. Per the SCSW this meant a value of $135 to $200 in 2006.

Edit: A post by XavierBreath, moderator at the www.thehighroad.org notes that the change to heated treated cylinders occurred in September 1919. So if he is correct then 1915-1919 is the age range.
 
Radagast, I have a question for you.

Square butts were available, but the round butt (like yours) was more common.
Click to expand...

Radagast,

I read on some internet sites including these blessed forums that the sq butt vs rd butt is a typo in the SCSW. I of course have a 1905 4th change, 253XXX, with the original grips and a nickel finish. At first I thought I got a great deal since I know nickel is more rare, and the sq butt was said to be more rare in SCSW. I have the SCSW so don't bother looking up my SN ;)
In my independent research and from what I've seen, the rd butts seem to be more scarce making it in fact vice versa. I also discussed it with a guy from S&W and he said that most revolvers back then were sq butt. What have you seen? Did you bother investigating the typos that are all through the SCSW? Just curious as to your experience and opinions.
 
I read on some internet sites including these blessed forums that the sq butt vs rd butt is a typo in the SCSW.
Click to expand...
+1; Jim Supica, one of the SCSW co-authors, has acknowledged that he got this backwards. :o

I don't have my books handy, but IIRC the square-butt frame debuted approximately midway through the model run of the .38 M&P Model of 1902, 1st Change, although it was not catalogued. Some collectors consider the very early SB guns to be a separate transitional model, a "pre-Model of 1905" so to speak, rather than a Model of 1902 per se.

IIRC the SB frame quickly overtook the original RB frame in sales once the Model of 1905 officially debuted. If the RB frame ever outsold the SB frame, it only happened early in the production run of the Model of 1905. Whether it happened at all, and if so, for how long is a matter of some debate.
 
Winchester-73, carguychris, thanks for the correction there. I'm in Australia, so although I have shot or handled more models than most people I know ( I am a part time employee of a gun dealer, formerly I've qualified for the Australian practical pistol team & I lost track at the number of different models of pistol I've shot sometime after number 67), I don't have access to the full range of experience that you guys do. Answering questions here and at The High Road, I stick to what the SCSW says and generally point out that I'm referencing it.
Off the top of my head I've actually shot the following guns:
S&W 60, 64, 640, 66, 63, 28, 627, 625, 629, 29, 15, 686, 617, 59, 2206, 422, 22a, 586
Webley MKIII, MKIV, Enfield No.2.
Walther PP, PPK, P1, P99, P22
Colt SAA, Woodsman, 1911 Gold Cup, 1991A1 9mm
Uberti SAA, Uberti 1851 cartridge conversion
Glock 17, 19, 21, 22, 23, 27, 27L, 31, 34, 35
Mauser Broomhandle
Ruger SP101, Single Six, MKII, 22-45
Otis A. Smith Top Break
Iver Johnson Model of 1900
STI 2011 standard gun in .40 & open gun .38 super
Norinco 45, 9mm single stack, 9mm double stack 1911s.
Springfield Armory 1911 single stack 9mm, 1911 double stack 40 & .45
Para Ordnance P16-40, P14-45
Bul M5 double stack in .40, 9mm, & .38 super
CZ75B, CZ75SP01, CZ85
Beretta models 86, 92fs, 92, 92G Elite II, 96, Tomcat,
Tokarev TT33
Browning Buckmark, High Power
HS2000 (Springfield XD) tactical in 9mm.
There are probably a few more that I can't remember.

These day's I'm taking an interest in S&Ws, looking up peoples queries gives more of a feel for the guns than reading SCSW from cover to cover.
 
Johnathank1982: Your model 38 was made in 1973-74 in the serial number range J100000 to J250000. Your 649 should date to December 1993 or January 1994. The Standard Catalog of S&W records BPKxxxx in December and BDYxxxx in January.
 
I'm wondering about the year of manufacture for a 38 S.&W. Special CTG
Model 64 Serial #AWH 7575.

Your help is much appreciated! Thanks.
 
S&W Serial #

Hi, just joined. Looking for manufacture date old S&W Mod 29 .44 Mag 4" s/n 24xxx. Purchased 1967 in England. Has UK proof marks. Can anyone assist? TIA - Larry
 
Last edited:
S & W Serial #

Also Mod 10 4" .38 spl Ser # 383xxx. and Mod 12 .38 spl Airweight Ser # 56xxx - has three crowns stamped on r/h side possible Norweigen (?) military use? Many thanks
 
Last edited:
...old S&W Mod 29 .44 Mag 4" s/n 24xxx. Purchased 1967 in England.
Click to expand...
That's not a valid postwar serial number. It's probably an assembly number. The serial number is on the butt and should have an "S" prefix in that era. You may have to remove the stocks (grips) to view it.
Mod 10 4" .38 spl Ser # 383xxx. and Mod 12 .38 spl Airweight Ser # 56xxx
Click to expand...
If the Model 10 is actually stamped MOD. 10 inside the yoke cut, that serial number should have a "C" or "D" prefix. If it's not model-numbered, no prefix = .38 Military & Police Model of 1905, 4th Change produced in the 1930s; "V" or "SV" prefix, it's a Victory Model produced during WWII circa late 1943.

The number from the Model 12 is probably an assembly number unless it has a "D" prefix. K frame serial numbers were a "C" prefix followed by 6 digits when .38 M&P Airweight production began.
 
You must log in or register to reply here.
Back
Top