12GA Rifle From Hell
- Thread starter HUBEL458
- Start date
I tested in NEF 3' cases, Alliant 2400 with
small primers, Fired ok at 75 deg but when
case cooled there was majority of misfires
and squib loads. Don't reccomend it, not reliable.
Here is picture of Mauser 12ga bolt action
GEHA with a heavy barrel like I will put
on it Make a good slug gun.Ed
small primers, Fired ok at 75 deg but when
case cooled there was majority of misfires
and squib loads. Don't reccomend it, not reliable.
Here is picture of Mauser 12ga bolt action
GEHA with a heavy barrel like I will put
on it Make a good slug gun.Ed
The 12GA From Hell is now on
Ammoguide, the last page of
cartridge list.Ed
http://ammoguide.com/?catid=611
Ammoguide, the last page of
cartridge list.Ed
http://ammoguide.com/?catid=611
HDTVSELLER
New member
love the gun!!!
Along with testing loads in 3.5" plastic, later tested same loads
in 3" RMC brass cases; and with 600gr slug, same wt 4227 and
7383 surplus powders got same 2100 fps.I got a MEC Super Sizer
coming to size base of plastic and RMC cases. Both are hard to
resize with regular die, but this will save time and allow many
more firings of the cases.Just got 3.5" plastic for dime each,
and this sizer will allow as many firings as the RMC brass.Ed
in 3" RMC brass cases; and with 600gr slug, same wt 4227 and
7383 surplus powders got same 2100 fps.I got a MEC Super Sizer
coming to size base of plastic and RMC cases. Both are hard to
resize with regular die, but this will save time and allow many
more firings of the cases.Just got 3.5" plastic for dime each,
and this sizer will allow as many firings as the RMC brass.Ed
LET'S MOVE ON TO SOMETHING DIFFERENT. 
AFTER 268 POSTS, WHAT MORE CAN BE SAID THAT HAS NOT ALREADY BEEN REPEATED A DOZEN TIMES?What's with all of the yelling TPAW?
How about you redirect some of that anger towards the person holding the gun to your head making you read this thread?
There are some of use who have been following the evolution of this since the beginning and who are still interested in future developments.
In other words, shut up and go away.
How about you redirect some of that anger towards the person holding the gun to your head making you read this thread?
There are some of use who have been following the evolution of this since the beginning and who are still interested in future developments.
In other words, shut up and go away.
A lot of research with different guns, and equipment is
still being done, and planned. We just want to share.
A bullet fella contacted me and he will make
750gr jacketed 12ga slugs for buck and a half.
He uses Corbin equipment, and that is a very
great price as others have quoted almost
50% more. Minimum order 500 bullets.He
has to get couple pieces of punch and die
tooling to make them .729" to fit most rifled
barrels, and he will get tooling if we pay
half, which is 300 bucks. I want to find
10 guys to put in 30 each plus order 50 or
a hundred and we have him get tooling ordered.
Contact me so I can see how many want to get
in on the deal.Then after I tally everyone
I will get back to you for the funds for dies
for you to send the them to him..Here is pic
of a sizer we got that does plastic
cases back to factory specs in few seconds
and allows 3 times more reloads. It will
also do the RMC cases I have. No more cases
sticking in dies, or spending 5 min
to get them sized only half assed.ED.
still being done, and planned. We just want to share.
A bullet fella contacted me and he will make
750gr jacketed 12ga slugs for buck and a half.
He uses Corbin equipment, and that is a very
great price as others have quoted almost
50% more. Minimum order 500 bullets.He
has to get couple pieces of punch and die
tooling to make them .729" to fit most rifled
barrels, and he will get tooling if we pay
half, which is 300 bucks. I want to find
10 guys to put in 30 each plus order 50 or
a hundred and we have him get tooling ordered.
Contact me so I can see how many want to get
in on the deal.Then after I tally everyone
I will get back to you for the funds for dies
for you to send the them to him..Here is pic
of a sizer we got that does plastic
cases back to factory specs in few seconds
and allows 3 times more reloads. It will
also do the RMC cases I have. No more cases
sticking in dies, or spending 5 min
to get them sized only half assed.ED.
Here is the Enfield I reamed out to feed 12 gauge and BMG
size cases. I added two rear bolt locking lugs, one the huge bolt
handle and another added that locks in rear bridge. The front lugs
still contact on their top 40 %. This is concept from earlier shown
Mauser shotgun conversions, where they were made from 98
Mausers, giving a bolt action 12ga.This one is chambered for
my belted 700H 3.25" case, as a load developement test gun.
Loads up to 825 gr at 2500.
size cases. I added two rear bolt locking lugs, one the huge bolt
handle and another added that locks in rear bridge. The front lugs
still contact on their top 40 %. This is concept from earlier shown
Mauser shotgun conversions, where they were made from 98
Mausers, giving a bolt action 12ga.This one is chambered for
my belted 700H 3.25" case, as a load developement test gun.
Loads up to 825 gr at 2500.
FirstFreedom
Moderator
I think: "Great googily moogily - what the hell is THAT?!?" 
It is the 8GA From Hell, a real cartridge. 4.3 inch long
brass case. 8 ga shorter plastic case, plan on in same chamber.
Looking now for guns or actions and barrels. I make it
from 20mm Suzy brass(20mm Hispano Suiza), by putting
on a 8ga size rim and reshaping like we did 12GA FH....Ed
brass case. 8 ga shorter plastic case, plan on in same chamber.
Looking now for guns or actions and barrels. I make it
from 20mm Suzy brass(20mm Hispano Suiza), by putting
on a 8ga size rim and reshaping like we did 12GA FH....Ed
sharpshot08
New member
That gun is amazing
Magnum Wheel Man
New member
HUBEL... I've followed this thread, & been wanting to do a project similar on the 10 gauge...
... do you know any place to get rifled choke tubes or someone who could build one for a 10 gauge barrel ???
I've been thinking this would be an interesting starting point for self abuse...
... do you know any place to get rifled choke tubes or someone who could build one for a 10 gauge barrel ???
I've been thinking this would be an interesting starting point for self abuse...
