Smith and Wesson serial number search

for what i can gather it is a S&W 64 with number 41828 2 sg47 on the flip down part near the cylinder. on the butt of the gun the number D490XXX. can somebody help with maybe a year it was made and maybe what it is worth?

also on the barrel of the gun it has 38 s&w special ctg
Click to expand...


The S&W model 64 is a stainless-steel version of the model 10, a fixed-sight service style revolver made on the K frame. It was introduced on Sept 1, 1970 at s/n D224001.

Originally it was made with either 4" light tapered barrel with square butt, or 2" barrel with round butt. Later a 3" barrel version and heavy-barrel 4" version were offered as well. In all its variations the model 64 was a very well made, high quality revolver.

Some were made in .357 Magnum for the Oklahoma Highway Patrol and marked model 64-1, this version was then renamed the model 65. Both the 64 and 65 were very popular police sidearms in the '70s and '80s.

S/N D490XXX would date to 1972-1973, most likely early 1973.

Can't say your pawn shop estimate is wrong but it sure is a wide range. You might do a search at the gunsamerica, gunbroker and gunsinternational sites where you'll see photos and prices. That way you can see what asking prices are for revolvers in condition similar to yours.
 
629-1 S&W

I have a 629-1 S&W, serial #AFL2510 could you help me to find the dob. It has 8 3/8 barrel lenth,smooth trigger and target hammer .a Mag n port complete make over. thanks a million ed
 
just bought a smith & wesson model 49. need to know when it was made...

Hey guys, I just bought a smith and wesson model 49 with the serial code 76340 B11. Any ideas as to how old this gun is?
 
Hey guys, I just bought a smith and wesson model 49 with the serial code 76340 B11. Any ideas as to how old this gun is?
Click to expand...

Those numbers are most likely assembly numbers. The serial number is on the bottom of the grip frame. See laytonj1's post #4769 for an example.
 
Dave (or anyone else) -

First, thanks for doing this. I think that it is a real service to the community.

Second, a non-gunnie friend contacted me. She's received her father's old .32, S&W #55870. I've shot these guns before, but can't say that I'm knowledgeable about them. Any info I can pass along to her would be most welcome.

Jim
 
She's received her father's old .32, S&W #55870. I've shot these guns before, but can't say that I'm knowledgeable about them. Any info I can pass along to her would be most welcome.
Click to expand...


This one needs more information, preferably a couple of clear photos of both sides. At a minimum it would be necessary to know if it is single action; double action with exposed hammer; or double action with concealed hammer.

There were several top-break S&Ws in .32 S&W which could have had the s/n referenced; for example the model 1 1/2 single action, the .32 Double Action 4th model, and the .32 Safety Hammerless 1st Model.

The Hand Ejector with swing-out cylinder was also chambered in .32 caliber but for the .32 S&W Long cartridge.


First, thanks for doing this. I think that it is a real service to the community
Click to expand...

laytonj1 is the person who really deserves thanks for this very informative thread. His first post was #3 back in January 2008 so he is coming up on four years of answering questions, and has answered thousands of requests. I and a couple of others chip in as time permits to help carry the load a bit, but it is really Jim Layton's diligence that makes this thread work.
 
can someone help me with the year and value of my sw revolvers

My father gave me both of them and told me they where my grandfathers. First i have a sw .357 magnum K 264509 I think it is stainless but might just be crome plated. I dont know much about these at all and i was told not to shoot it because the cylinder doesnt rotate fully to line up with barrel due to heavy shooting. Second i have a sw .22 long rifle ctg K 88284. This one i was told has been re blued and is safe to shoot. I have no plans to sell either one of these but I would like to know the value and the year. I want to hand these down to my son some day and wonder if the .357 is worth getting repaired or if it will cost more than the gun is worth? Thanks for any help Dave
 
First i have a sw .357 magnum K 264509 I think it is stainless but might just be crome plated.
Click to expand...

A "K" s/n prefix indicates it is built on the medium K frame with adjustable rear sight. In .357 Magnum caliber it would be the Combat Magnum. In fact it would be one of the first 5,000 ever made. Roy Jinks in "History of Smith & Wesson" says the factory set aside numbers K260001 to K265000 for the first group made in 1955 and sold in '55 and '56.

S&W did not use stainless steel at that time. The Combat Magnum was made with either blue or nickel finish, with blue being much more common.

wonder if the .357 is worth getting repaired or if it will cost more than the gun is worth?
Click to expand...

Depends on how much repair is needed. If it is just a matter of the cylinder not carrying up properly, or having rotational and/or fore-and-aft play, having it retuned is fairly straightforward. If it were mine I'd be getting in touch with S&W and work with them to see what needs to be done and what the cost would be. Certainly the Combat Magnum is a fine revolver and well worth the time and effort.

sw .22 long rifle ctg K 88284.
Click to expand...

The s/n dates to 1950. It is most likely a K-22 Masterpiece (6") barrel, possibly a Combat Masterpiece (4" barrel). Re-bluing pretty much kills any collector interest but assuming it is in sound condition it is one of the finest .22 revolvers ever made and still in demand as a shooter.

Any value estimates I gave would be so full of qualifiers and over such a broad range as to be useless.
 
Hi, folks. Maybe someone here could save me a trip to the library in downtown Nashville? I can get this information, but I'm hoping some kind soul will help me out here thus depriving OPEC of their pound of flesh (gallons of gas.) I'm looking for a ballpark age on this SW revolver that recently came into my husband's possession? It was his father's gun, who took it off someone who drew on him back when he was a state trooper. This is the number stamped on the butt of the grip: 41xxx. There are no letters before the numbers or unusual spaces between them. It has a pearl (mother of pearl?) grip. There is some pitting, but I recognized the SW trademark. Otherwise the engravings are pretty difficult to decipher. Thanks in advance.

Edited to add: It is 4 inches from the face of the cylinder to the end of the barrel. -s3
 
Last edited:
Model 36 Manufacture Date

Any help appreciated, Model 36, Serial # 361XXX. I'm wondering what year it is, thank you in advance.
 
This is the number stamped on the butt of the grip: 41xxx.
Click to expand...
S&W reused the same serial numbers thru many different model and over a large span of years.
To even get close we would have to first figure out what model of S&W it is.
Does the cylinder swing out to load/unload or does the whole barrel and cylinder assembly tilt down to load/unload?
What is the caliber? It should be stamped on the side of the barrel.
How many rounds does it hold?
We'll start from there.
A picture would really help.

Model 36, Serial # 361XXX
Click to expand...
SN's ran from 295000 in 1962 to 786544 in 1969.
You'd be right around 1964.

32 S&W long Regulation Police Target, serial number 5049XX
Click to expand...
Wish I could be of more help but all the book shows is 260000 in 1917 to 536000 in 1942.

Jim
 
laytonj1 is the person who really deserves thanks for this very informative thread
Click to expand...
Thanks Dave, I appreciate the compliment. But, you and a few others have really helped out allot with this thread.

Jim
 
You must log in or register to reply here.
Back
Top