Keep it simple... We all love pics
- Thread starter topspin43
- Start date
- Status
Latest acquisition, the Ruger SR1911...maybe the best combination of features (beavertail safety, extended safety, Novak sights, tight rails and slide, and extended target trigger, beveled magazine well, two mags (one 7 rnd for carry and one 8 rnd for CCW reload) and a trigger pull that's better than 1/2 to great. Accuracy is superb with my Federal carry load (230 gr Hydra-Shok) and Winchester's 230 gr White Box 230 gr FMJ...at ~$35 a box at Wally World, it's as cheap as you can expect and still get reloadable brass. Here's a cpl of pics. The 2nd shows it wearing Marvel's .22 LR upper...again, superb accuracy...sub 2" gps to 25 yds.
Best regards, Rodfac
Best regards, Rodfac
aarondhgraham
New member
My latest purchase,,,
Beretta Model 85BB in .380 ACP
I bought it used with 2 mags for $400.00
She pairs up nicely with Allegra, my Beretta Model 87,,,
Aarond
Beretta Model 85BB in .380 ACP
I bought it used with 2 mags for $400.00
She pairs up nicely with Allegra, my Beretta Model 87,,,
Aarond
RampantAndroid
New member
More images coming - I need to try again to get a picture of the double stamping on my model 29.
http://rampantandroid.com/images/Guns/General/DSC_0049.jpg
http://rampantandroid.com/images/Guns/General/DSC_0045.jpg
http://rampantandroid.com/images/Guns/General/DSC_0049.jpg
http://rampantandroid.com/images/Guns/General/DSC_0045.jpg
Tactical Jackalope
New member
Gimador. NICE!!!
22/45 MK-III Target Model
Volquartsen:
Exact Edge Extractor,
SureStrike Firing Pin,
Target hammer,
Target sear,
Target trigger w/ over-travel screw, return trigger plunger spring and polished plunger,
V-Comp Compensator,
Bolt Assist,
Titanium Disconnecter.
Mag disconnect removed using Sam's hammer bushing and I installed bpatza's Loaded Chamber Indicator (LCI) Cover.
Grips and Mag Bumpers by TechTeach @ rimfirecentral.com Dominic.Notaro@csinet.net
Hammer bushing from Sam Lam @ rimfirecentral.com sg552.2@gmail.com
Cocking Handle by Brian Alcaraz, bjtraz@swbell.net
I Throated her and polished the feed ramp too.
The trigger is MUCH lighter and breaks nice and clean with NO creep and no over-travel. Once I adjusted the take-up as far as I could and still get reliable reset I am left with about 1/32" take-up before you feel resistance then she breaks like glass at maybe a pounds pressure! I doubt I will be making any changes to the setup from this point on other than a special set of grips I have coming!
Volquartsen:
Exact Edge Extractor,
SureStrike Firing Pin,
Target hammer,
Target sear,
Target trigger w/ over-travel screw, return trigger plunger spring and polished plunger,
V-Comp Compensator,
Bolt Assist,
Titanium Disconnecter.
Mag disconnect removed using Sam's hammer bushing and I installed bpatza's Loaded Chamber Indicator (LCI) Cover.
Grips and Mag Bumpers by TechTeach @ rimfirecentral.com Dominic.Notaro@csinet.net
Hammer bushing from Sam Lam @ rimfirecentral.com sg552.2@gmail.com
Cocking Handle by Brian Alcaraz, bjtraz@swbell.net
I Throated her and polished the feed ramp too.
The trigger is MUCH lighter and breaks nice and clean with NO creep and no over-travel. Once I adjusted the take-up as far as I could and still get reliable reset I am left with about 1/32" take-up before you feel resistance then she breaks like glass at maybe a pounds pressure! I doubt I will be making any changes to the setup from this point on other than a special set of grips I have coming!
- Status