JOC Tribute Rifle

Well, it's a Featherweight hunting rifle that usually wouldn't get shot more than 2-3 times in the field. I suppose those three shot groups would tell the story better than going for five shots unless you wait a couple minutes between shots. I do that even with my Sako Vixen .222 that has a much thicker barrel.
 
it's a light weight rifle designed to be hunted with... 1 - 2 shots at most in succession... I think it's also the lightest barrel I own as well... mine will likely never be hunted, but will be shot on nice days at the range... & I find most of my long & magnum actions require a slower course of fire... I generally sit with the bolt open for 4-5 minutes between shots if I'm really trying to get good groups...
 
This one will never see the killing fields either since my hunting days are past. If I get too cold at the range I can sit in the car awhile till I get warm again. You can't do that half a mile or more in the woods waiting on that 12 point buck. It will get shot at the range, taken home and lovingly cleaned.
 
Good points guys...This is why my groups are always done with Clean Cold Barrels. Thats really the only shot that matters. I would shoot one shot, clean, and let cool down. I have done 5 shots in a row and the groups are still outstanding but the barrel is hot as hell.
 
scopes & scope rings ???

so did you guys get the newer logo'd Leupold rings on your rifles ???

the new set I bought has the logo, but I have sets that are plain... since I decided to put a Leupold scope on the rifle ( instead of a Nikon ) I went with the new logo rings in gloss blue... just curious if you guys are going for the vintage look, & used plain rings ??? I think the logo adds a classy look, so I'll keep them on mine...

this is an portion of another thread I have on the rings...

... in doing so, I've bought 3 new sets of Leopold rings & bases, from Cabelas... Cabelas doesn't always have the best prices, but I noticed that these rings have the Leupold logo stamped / engraved into the top of them, & none of my other Leupold rings do... one set is new, but plain, that I bought from another place... perhaps it was older stock, & all their new rings have the logo ???

anyone know, if they are making 2 grades of their standard rings ??? one for higher end retailers, that have the logo, & a cheaper set, that are plain for cheaper retailers, or if all their new production have the logo ???

normally I wouldn't care, but 2 of the rifles I'm scoping up are my new JOC tribute Winchester 70, & a Remmy 700, 100th anniversary of the 30-06, so I'm happy to have the Leupold logo rings on those since both will wear Leupold scopes, but some of the other rifles will wear other brands of glass, so the logo doesn't do anything for me, & in fact, I might prefer a plain top to my rings, if they have a Burris, Nikon or other scope...

BTW... I have the question posed to Leupold customer service, to get my question on the logo / no logo new rings answered...
 
Last edited:
Apparently all the new rings have their logo. I've bought two sets in the past couple months and they both have it. I think it gives them a bit of "class" to an already fine set of rings.
 
well... I just bought a Leupold VX3 3.5X - 10X 40mm in gloss black for this rifle... I think it'll look nice on it, & go with the new Leupold rings & mount :)

now I need to get some factory ammo to dial it in with, ( wanted to look through this thread, as I thought MYSTRO had listed the ammo he shot those groups with ) once I pick up some good factory ammo & get a base line group to try to better with my handloads... Oh... & wait for some warmer weather & a bit of the snow to disappear

BTW... just went through Midway... & the only Federal or Hornady 270 ammo in stock, is Hornady's American Whitetail Ammo 130 grain Interlock Spire Point... I assume the same bullet as MYSTRO used, but maybe not quite as "good" a powder ??? since this looks more like "value" priced ammo ???

I might have to stop by Cabelas this next week, & see what they have on hand
 
Last edited:
Magnum, I shot that American Whitetail ammo 130 grn, through my Savage "22 barrel, and I wasn't satisfied with groups. And the primers were pretty flat, if I was you I'd try the 130 grn Custom ammo from Hornady.
 
The ammo Mystro used was Hornady's 130 gr SST. That's what prompted me to order a couple boxes. Of course, I didn't get no bug hole group like he did but what I noticed, at least in this rifle was what appeared to be pressure signs with cratered primers. May be just the firing pin and bolt hole size, I don't know. This is a pic of those loads fired in two separate 270's. The one on the left is from the JOC rifle and that on the right a 1952 M70.



I think Hornady's loads border on being a bit hot. On the box it has a MV of 3200 fps.
 
For any of you JOC fans, I saw this question posted at the JOC forum about the wood used in the Tribute rifles and thiought I'd post it and the response from Bradford O'Connor...

"I do have a question for you Mr. O'Connor. Did Winchester find a different source of wood for the Tributes and Custom Tributes. They have a deeper color(darker wood-more contrast) than most of their rifles. I am wondering if they were Turkish Walnut. There is more mineralization within the grain. It is also interesting that the Tributes AA and AAA look nicer than grade iv supergrade walnut."

Response:

We now have the answer from Mr. Hatt: "Yes, as was from the beginning we have used a different walnut. Normal Winchesters, including the Super Grade, all use American Walnut (Black Walnut). For the JOC commemoratives we used French or the U.S. version of French walnut which is called Claro. This was designed after the Biesen stock used on the #2 rifle which was French walnut. I agree, they look nicer than the in-line Super Grade rifles. That was the intent.''
 
Back
Top