1100 question

As neat as this choke system is, its not complete. I need the other three chokes. If I had those I would keep it for sure.

I would gladly trade even with someone that has a bridged barrel in mod choke and the blueing is in similar condition as this one is.

But if I do get Mike Orlin to cut it and choke it have I lost any value to the gun? I would definitely gain useability. I would probably end up with a 26" barrel.
 
I sent Don Corson a e-mail to see if he wanted to swap out even on a barrel. He sells the Cutts components. Its a long shot though.....
 
But if I do get Mike Orlin to cut it and choke it have I lost any value to the gun? I would definitely gain useability. I would probably end up with a 26" barrel.
Click to expand...
On a $100 gun !? Surely you jest.
 
Another plus is that I already have a full set of the choke tubes that Orlin installs. I bought them when I had him choke the barrels of my "X" model 20g 870 and my Pardner SB1.

This idea is looking better and better!:)
 
You might want to check how long your barrel will be to make sure it won't be too short for your use. (Measure twice, cut once sorta thing ;))
 
This is a nice gun. The more I look at it the more I want to either leave it as is or find a good mod choked barrel for it
 
One more question; This is an old gun but has a low round count. Should I replace the gas rings and O rings or just the O rings?
 
just the 0-ring, unless it has seen alot of rounds. i have never changed the gas rings in any of my 1100,s and some have seen heavy use. your 1100X will take a 1100 12ga #19 0-ring. the smaller framed 1100 20ga takes a #21 0-ring. eastbank.
 
I work in facility that stocks about a million "O" rings. I will go to the supply room and pick some #19's up.

Thank you!
 
#21 is 12 gauge and #19 is 20 gauge lightweight. Its the size in millimeters. Make sure you get Viton or ones that are resistant to oil/solvents and heat. The el cheapos will dissolve. Neoprene isn't bad, but Buna is. I have one on one of my 1100s that has been there since 1967 or so. They do not move in service; they get torn by ham handed people during diassembly and re assembly.
 
op,s, you are right. 21 is for the 12ga 1100 and the 1100 20ga on the 12ga frame and 19 is for the later 20ga 1100 made on the smaller frame. sorry for the misinformation. eastbank.
 
I could only find buna locally but I ordered some from midway that are supposed to hold up better. The buna will get me shooting this weekend. Time for a real good cleaning. I have never seen a gun this dusty. Its going to shine like new money when I get done with it
 
Although this gun hasn't been used much it was very dirty. I doubt it had ever been cleaned other than the barrel. I took it apart in front of the original owner, a good friend of mine, and he had no idea how to tear a 1100 down. He never knew a shotgun could be broken down as quickly/easily as this Remy could be. It was gunked up bad!

IMG_20150416_212518_150.jpg

IMG_20150416_212508_753.jpg

IMG_20150416_173028_358.jpg


He told me the story of the Cutts Compensator and who put it on for him. I knew the gunsmith that did the instal and he was known for good work.

Mr Greer(Greers Gun Shop, Boones Mill VA, now out of business) taught me how to repair guns and I volunteered time in his shop just to learn how to repair guns. His grandson and I were good friends and graduated together. He taught me how to run a lathe and a Bridgeport, strip stocks and blueing, re-blueing, and many more great experiences. I once took a .303 and "sporterized" it in his shop including turning the barrel down and re-blueing the metal and replacing the furniture with Fajen stocks

I think I will keep this choke/barrel on this gun in respect to a man that instilled a passion in me of tinkering with guns. I'm proud to own some of his work. Makes the gun priceless to me.
 
I just ordered the MCarbo spring for the trigger, I run them on my all my 870's and my 11-87 and really like the reduced pull.

Next step is to help the original owner find the rest of the Cutts chokes at his house. He thinks he has them. If not Corsons Barrels has them in stock but they are pricey, 60-80 each. I need three to complete the set
 
So after much searching I find that they only made 3 chokes for the 20 gauge Cutts, spreader, mod, full. But they had those in steel and alloy.

Why alloy?

My Cutts box has definitely had six chokes in it so I'm thinking he lost the alloy chokes somehow but managed to keep the steel chokes.

Also, which choke for skeet? I would guess mod but I have read spreader
 
I may be wrong, but I thought the Lyman tubes would fit the Cutt's system. And they made more than 3 sizes of those. I would watch those vents in the compensator body. I have never heard of one blowing, but I have seen pieces of shotcup petals hanging out of the vents. They were designed back in the days of fiber wads.
That nasty gun reminded me of when I went shooting clays at a company function with two guys from work. I had my 1100, and they had a Browning Gold and a Beretta Sporting. By station 7 both of theirs were jamming. We stepped aside and I tore them down and they both looked like they had been well lubricated with tar. Neither had ever broken them down to clean them. I borrowed a dirty rag and some WD-40 from a groundskeeper and gave them a quick once over, and they were fine the rest of the way. I may be wrong, but I think they are more typical of most casual shooters than many realize.
 
As neat as this choke system is, its not complete. I need the other three chokes. If I had those I would keep it for sure.
Click to expand...

do you really need all those chokes?

I shot trap and hunt with my modified and it works fine.

the cutts actually works great, great gun for beginners to shoot

I only swap choke when I shoot slugs, and I don't think I need to really
 
Normal SK chokes are .005, so the spreader might be decent enough. Again, as I mentioned in another thread, take the ammo you intend to use in that gun to a pattern plate and see what you get.
Nominal dimensions, the M would be a tad tight as skeet targets are shot at a distance of 21 +/- yards, and a M is usually good for 40 yards.
 
You must log in or register to reply here.
Back
Top