Would this make a good bench?

I doubt the top is sturdy enough to allow for high-torque resizing of rifle brass, unless something far sturdier is attached to it. And I don't think the frame is sturdy-enough, either. You would be better-off building your own.
 
I don't think I would want to use that for our purpose, computer maybe.
I built mine from 2 base cabinets I got from a house my son was doing a remodel on and made a top from 2x6"s . Got another wall cabinet above works for me.
 
My bench top is made of 1" MDF with a select grade 2x8 across the front for mounting presses. Back supports are tied to concrete floor and ceiling joists. Supports are 24" OC. Storage shelf under benchtop (also 1" MDF)holds approx 400# of bullets--this thing DOES NOT MOVE.
 
I'm moving it indoors today and getting it set up. I need to find someone to help put the desktop on, too much for me alone. I'll put up pics when complete.
 
I have a couple of benches made from the usual press board with laminate finish, like you describe.
They have never broken yet, even for reloading with a rather large and heavy progressive press.
The trick seems to be to use them indoors so they can't get damp and crumble.
 
If you need a good reloading station that fits a small space and can be moved to a new home or apartment This is simple to make and can go through a 36" doorway without removing the door. I came up with this after having to leave behind two very well made reloading benches that were built in to the structure of my homes. (walls and/or ceiling joists) I have dimensioned drawings, bill of materials and cut sheets available if you need them. They work well if you have one press and like to sit while you punch out ammo. I use two of these, one for each press, and I have added padding to the seats. At nearly 70 comfort becomes more important.
attachment.php


I also use cupboards that are mounted by rail to the wall rather than building the attached cabinet.
 
Could you replace that top with a lamination of three layers of plywood bonded together, or just a one inch layer plank?

I see nothing wrong with it, per se, but obviously I have concerns about the less than robust material after many hundreds of cycles with heavy rounds.

There is a plywood made with birch that is stronger than pine planks.
 
Over the past year since I have retaken up Handloading I've have seen examples of all kinds, shapes and sizes of benches that folks are using. Some are pretty ingenious, some are very pain yet functional. It's a part of taste, need or space limitations.

One I'd seen from a member was a steel cabinet with double doors that he built a bench top in. When not in use he is able to close the doors and lock it all up. Apparently it works well for him!

Bughunt post us some pictures when you have it in place.
 
briandg Could you replace that top with a lamination of three layers of plywood bonded together, or just a one inch layer plank?

I see nothing wrong with it, per se, but obviously I have concerns about the less than robust material after many hundreds of cycles with heavy rounds.

There is a plywood made with birch that is stronger than pine planks.
Click to expand...

Brian,
I'm not sure if you were referencing my design or not but if so:
The table top is supposed to be two layers of 3/4 inch plywood glued together and the front has a 2x4 running the full width for mounting the press. It is rock solid and will outlast a plank top as well as being smoother for clean-up.

The picture is from a guy I sent the plans to and when he finished he sent pictures. I rarely take photos of my work - too interested in getting the job done and putting it to work.
 
As John D said, an old steel office desk is hard to beat. I've got several in my workshop. Once they get any wear at all, no one wants them in the office. They are heavy, sturdy and cheap or free.

The computer rack looks nice but made for a different sort of use. Still an excellent work station for lighter work. In fact, short of resizing it might handle everything.
 
My first reloading bench was a section of a bowling alley that my Father got from the alley that he bowled at. It's really solid, it's still functional and it's been in place over 35 years.
 
shootist, I was referring to the original question.

I don't think that particle board will hold up to the repeated flexing.

Two or three layers of good quality plywood laminated with glue, with grain alternated will hold up to nearly anything; he can lay it out with wood glue and run drywall screws through it to further the rigidity.

Lots of home improvement stores carry sheet laminate and sheet laminate would make plywood perfect.

Solid, good grade plank works well.

There are plenty of possibilities. But no matter, that table top was meant to have maybe 100 pounds of electronic equipment laying on it, not having heavy mechanical devices working on it, and any type of fiber board might eventually fail.
 
A bit of background on my day job- I have worked for the world's largest commercial office furniture manufacturer since 1993, and have first hand experience with the product that the OP linked to. Mayline makes upper end commercial products.

Please do not assume that the top is made from the the same garbage MDF that you would buy at the local home improvement store, because it is NOT. I would place good money that you could put a small block chevy engine on that top and it would hold up just fine.

adding a layer of 3/4" plywood underneath the top would be cheap insurance, but I doubt it will be needed.
 
You must log in or register to reply here.
Back
Top