Uberti Cattleman Hombre?

Z

ZVP

New member
I think I want one!
This is the most basic model of the Cattleman but other than a Brass backstrap and a dull finish, I don't see any differences between it and the shiney Cattalemen post-war model...
Is this the same action as the Cattleman?
Pretty reliable?
Can the Ubertis handle a steady diet of Cowboy & BP loads?
ZVP
 
The answers to your questions are:

Yes;
Yes; and
Yes.

I saw a photo of an Hombre that the owner had polished leaving an interesting antiqued finish.

A friend bought a pair recently; we traded revolvers for a couple of stages in a SASS match. The flat black finish works great for the sights.
 
I thought that I wanted one too, but then I woke up!
So I'm just going to hold out for a while longer to see what else pops up that I like better.
I missed out on a pair of USFA Rodeos in .38 Special that were on consignment for a steal. I keep wishing for them to be returned to the shop but as of yet no such luck! And they were mint too! But there's always that high polished stainless steel Vaquaro .44 Magnum with the white Ruger grips... :)
 
Last edited:
But by the time that one pays for the shipping and transfer, they're not much cheaper than other used models that may be available locally that hardly have any wear on them.
There's a lot of used guns on the market right now that are a good value.
And most don't usually have brass grip frames.
 
Hombre total cost

it was $250 on gunbroker , 20$ shipping and $20 xfer so $290 brand new,
the cheapest used I have seen around here for uberti SAA types was in the $350ish range so I came out just fine I think
 
I bought 2 of them in .357/.38, I thought they were a great deal. I've not been able to come close to that anywhere else.
Actually 2 of them wasn't that far away from 1 at the prices I've seen.

just my worthless .02 though.
Fine little pistols. OJW
 
*But by the time that one pays for the shipping and transfer, they're not much cheaper than other used models that may be available locally that hardly have any wear on them.
There's a lot of used guns on the market right now that are a good value.
And most don't usually have brass grip frames. *

whats so bad about paying the same price for a brand new gun that you may pay for a used gun? seriously? a gun is an investment and i have no idea what you used in it.

would you pay 30,000 for a ferrari that costs 1 million just because the engine sounded funny? its almost just as good as new..
 
I'm with Josey Wales. One of them bound up quickly with BP but a very few strokes with a very fine toothed file took a couple of high spots off the back of the barrel and it's fine now. They have nice, tight gaps. It was a deal I couldn't let go. Regular Cattlemen are a lot more. I did the same years ago with the Uberti 1858s and they are the same quality inside and they don't glare in the sun.
 
Sounds like a good buy to me!

OK, you guys convinced me, the Hombre is a good gun!
I don't need the bluing as much as I "want" a .45, this is a cheap way to get into the caliber.
I'll mostly shoot Smokeless new and reloaded ammo, but the possibility of shooting BP factory
cartriges is neat too!
Origonally I'd planned on getting a second Vaquero but in .45 however lack of funding changed my choices a little.
So a Uberti .45, Ruger .357 pair looks like what it'll be...
Thanks a lot guys!
ZVP
 
Newton24b said:
whats so bad about paying the same price for a brand new gun that you may pay for a used gun? seriously? a gun is an investment and i have no idea what you used in it.

would you pay 30,000 for a ferrari that costs 1 million just because the engine sounded funny? its almost just as good as new..
Click to expand...

Why do folks buy a brand new model if they don't like the way that it looks or what the grip frame is made from right out of the box?
I understand that some folks want to customize the appearance or antique their guns, but not do it just because they otherwsie can't stand the way it looks. They bought a brand new gun but don't even like it enough as it is?
I guess my point is that maybe an Hombre Millenium isn't for everyone. And I see that some folks buy them for the low price even though they're not thrilled with them, and will then end up spending more money & time to fix them up just to make them more palatable somehow.
 
Last edited:
I bought 2 of them, I like the black finish but the best selling point was They fit in the hand and point so naturally for me more so than any ruger I have owned. The balance and feel of the gun for me is the best selling point, plus they shoot great. I don't plan to shoot any high power loads so this is a very good buy for me. You guys must be lucky to find used guns that cheap, even used ruger run around 400.00 and up.
 
I think that they look pretty handsome but I've never bought a center fire revolver having a brass grip frame. Even considering the price, a brass grip frame wouldn't be my first choice.
And the Cattleman's having a steel grip frame aren't being offered at similar low prices which opens up a whole range of model choices.
Besides that, there was a question about why the cylinder of one Hombre purchased by someone here wasn't beveled when the others were. So if someone else orders one, will they receive a beveled one or not?
 
Last edited:
Why do folks buy a brand new model if they don't like the way that it looks or what the grip frame is made from right out of the box?
I understand that some folks want to customize the appearance or antique their guns, but not do it just because they otherwsie can't stand the way it looks. They bought a brand new gun but don't even like it enough as it is?
I guess my point is that maybe an Hombre Millenium isn't for everyone. And I see that some folks buy them for the low price even though they're not thrilled with them, and will then end up spending more money & time to fix them up just to make them more palatable somehow.
Click to expand...

because they like to? because now that gun was done by me not by someone else or the factory? , because it's a fun thing to do ? :D
 
I just want a good shootin .45!
I am on a budget and the price of the Hombre fits me.
I sorta like the brass gripframe since owning a .36 cal Sheriff's Navy Model. They polish up very pretty and the flat Black will be offset by the shiney Brass.
I like the 4 5/8" barrel length best!
Everything about the Hombre fits what I want, now I just need to find one.
ZVP
 
ZVP wrote:
Everything about the Hombre fits what I want, now I just need to find one
Click to expand...

Here you go ZVP. This link is to the folks who are selling them on Gunbroker as well as from their store for $250.00.....which you will not find cheaper anywhere else because they bought many hundreds of them and are making it up on quantity sales while selling them for an unbelievable low price of $250.00

http://tannerssportcenter.com/

Although they also sell them on Gunbroker, you can order straight from their store and save them the GB commission fees and I'm sure they would appreciate that. Which is what I did. By the way, Ray Tanner the owner is a member at this forum.

It was a no brainer for me. I bought two of them in the 4 & 5/8ths barrel length in .45 Colt caliber. They are quality well made and fully lived up to my expectations.

Like you I also like the brass grip strap and trigger guard. The frame being steel is the important part. There is no real stress put upon the grip strap and trigger guard that it can't handle being made of brass. Plus like you, I also like it because it can be shined up. Just a few minutes on a buffing wheel will take that matte finish off the brass and polish it mirror bright. Like you I also like how the brass contrasts with the matte black finish on the rest of the revolver.

I love both of mine. Get one....you won't be sorry and even if you were, you could sell it for what you paid for it in a heartbeat. Perhaps even a bit more.



.
 
Last edited:
You must log in or register to reply here.
Back
Top