Crankylove
New member
Have a Belgian Browning HP on lay-a-way right now, I guess that would be the next purchase. After that, gotta get my .358 Winchester, probably a Ruger Hawkeye, already have loaded .358 ammo, just need the dang gun now 
So what's your next handgun purchase?
- Thread starter CortJestir
- Start date
- Status
dabigguns357
New member
dpms panther .308 with aimpoint reddot sight,444 ss marlin,S&W 1076,S&W 629 6 1/2 barrel,Barrett m82cq 50bmg,and a .22 cal full auto machine gun.There are others but theses are my favorites so far.
tschmittel
New member
let's see:
a S&W 442 w/o il when they come out, and a CZ 75b. What can I say, I'm boring.
a S&W 442 w/o il when they come out, and a CZ 75b. What can I say, I'm boring.
Mike Irwin
Staff
I'm looking at a Beretta Storm in .45 ACP.
Ruger LCP! Finally found one.
My next purchase will be an LCP. They are hard to find. It seems that no sooner do they get one in, than it is snatched up before I can get there. This time I was at the store, just lookin, and I overheard one of the salesman saying they needed to bring out the LCP from the day's shipment and get it ready for display. I told em to forget about putting it on display
saves them the hassle. This time it did not even make it to the case before some lucky berstard put dibs on it.
Now for .380 components. Gotta get ready for the next baby.
Funon1
My next purchase will be an LCP. They are hard to find. It seems that no sooner do they get one in, than it is snatched up before I can get there. This time I was at the store, just lookin, and I overheard one of the salesman saying they needed to bring out the LCP from the day's shipment and get it ready for display. I told em to forget about putting it on display
saves them the hassle. This time it did not even make it to the case before some lucky berstard put dibs on it. Now for .380 components. Gotta get ready for the next baby.
Funon1
samuraimizu
New member
just bought a DPMS AP4 "so another gun wont be for a good while
" next purchase might be either a kimber or springfield 1911 or HK45 or 45c
" next purchase might be either a kimber or springfield 1911 or HK45 or 45cWell...
I'd like to buy S&W 586 or 686 4" (I used to have .357 (Colt Trooper 6") I had to sell it to get money...
...long story and maybe I tell it some other day. Anyway, when I sold Colt I promised to myself someday I will own .357 once again).
On the other hand I've bought during the past 12 months
- Glock m17
- High Standard Victor (obviously used, but it really plays any role)
- Toz 78-04L .22lr rifle (yep, it's Russian but it was imho real bargain: rifle, scope, silencer and some ammo for 285€ (about $382, I thnk))
So I'm afraid I won't get any permission from wife, I think... ;-)
I'd like to buy S&W 586 or 686 4" (I used to have .357 (Colt Trooper 6") I had to sell it to get money...
...long story and maybe I tell it some other day. Anyway, when I sold Colt I promised to myself someday I will own .357 once again).
On the other hand I've bought during the past 12 months
- Glock m17
- High Standard Victor (obviously used, but it really plays any role)
- Toz 78-04L .22lr rifle (yep, it's Russian but it was imho real bargain: rifle, scope, silencer and some ammo for 285€ (about $382, I thnk))
So I'm afraid I won't get any permission from wife, I think... ;-)
chrisp0410
New member
Good question!
Well, I now have at least one gun for every purpose now and several for some purposes so I am now looking at the "always wanted one of those" pistols. I suppose I would like to get my hands on a Coonan Model B to go next to my Coonan Cadet. Always loved a .357 magnum 1911 styled pistol and these were great guns.
After that, I would love to get my hands on a Colt 1911 reproduction and send it to JO-JOs for some retro custom work, i.e. French cut the slide, dovtail in a front sight, flatten and serrate the slide top, checkering on the front strap, serrating the back of the slide, underside of the trigger guard, install S&W K frame revolver sights, beavertail, trigger job, bobed hammer, polish the slide and frame flats and give it a high-end blued finish. Nitride the pins and finish it off with a set of high-end Double Diamond checkered grips, probably in Cocobolo or maybe smooth ivory. Now that would be nice.
In the meanwhile, I have a suppressed Ruger MkIII on layaway and I'm still hankering for a CZ-527 reworked to be an ultralight hunter in 6.5mm Grendel.
Another 10/22 would also be fun!
Chrisp0410
Well, I now have at least one gun for every purpose now and several for some purposes so I am now looking at the "always wanted one of those" pistols. I suppose I would like to get my hands on a Coonan Model B to go next to my Coonan Cadet. Always loved a .357 magnum 1911 styled pistol and these were great guns.
After that, I would love to get my hands on a Colt 1911 reproduction and send it to JO-JOs for some retro custom work, i.e. French cut the slide, dovtail in a front sight, flatten and serrate the slide top, checkering on the front strap, serrating the back of the slide, underside of the trigger guard, install S&W K frame revolver sights, beavertail, trigger job, bobed hammer, polish the slide and frame flats and give it a high-end blued finish. Nitride the pins and finish it off with a set of high-end Double Diamond checkered grips, probably in Cocobolo or maybe smooth ivory. Now that would be nice.
In the meanwhile, I have a suppressed Ruger MkIII on layaway and I'm still hankering for a CZ-527 reworked to be an ultralight hunter in 6.5mm Grendel.
Another 10/22 would also be fun!
Chrisp0410
This is a fun thread, and it could go on forever.
I just picked up my Ruger SP-101, which I haven't even shot yet.
A month before that, I picked up a used Ruger Redhawk Hunter, which didn't turn out too well.
Next on the handgun list (which is what was asked) I think it'll be a T/C Contender. For anything but combat, they are about the perfect handgun.
But before I get that, I'll probably get a Marlin 1894 in SS and 44 Magnum to go with the Redhawk and just be a fun range gun. (maybe a deer gun some day too)
I just picked up my Ruger SP-101, which I haven't even shot yet.
A month before that, I picked up a used Ruger Redhawk Hunter, which didn't turn out too well.
Next on the handgun list (which is what was asked) I think it'll be a T/C Contender. For anything but combat, they are about the perfect handgun.
But before I get that, I'll probably get a Marlin 1894 in SS and 44 Magnum to go with the Redhawk and just be a fun range gun. (maybe a deer gun some day too)
The next handgun I'm going to buy is going to be for my wife. It's going to be a 9mm. She's still checking out as many brands as she can.
My next handgun is going to be a G19. I've alway's wanted one. My wife doesn't like the feel of my G22 and G27. She's going to see if she likes the G19 but I doubt she will.
My next handgun is going to be a G19. I've alway's wanted one. My wife doesn't like the feel of my G22 and G27. She's going to see if she likes the G19 but I doubt she will.
The Professional
Inactive
Glock 17 if I can find it in the range of US$1,000/- (Presently available at about US$ 4,000 ~5,000 per unit. Did I mentioned per unit?
CZ-75 or CZ-SP01 and .22 converson kit, again if could be found in the range of $1000 (presently available at about $3,000/-)
These are so bloody expensive here in Pakistan. If I ever visit US, I'll come back with a suitcase full of them.....if I could get pass through the security at the airport
Why g17 so costly?
CZ-75 or CZ-SP01 and .22 converson kit, again if could be found in the range of $1000 (presently available at about $3,000/-)
These are so bloody expensive here in Pakistan. If I ever visit US, I'll come back with a suitcase full of them.....if I could get pass through the security at the airport
Why g17 so costly?
golfnutrlv
New member
Ruger Mark III .22.
Cheap and fun to shoot.
Cheap and fun to shoot.
- Status