Rings/mount for CZ 22LR & Nikon Prostaff

V

valkabit6

New member
I want to mount my Prostaff 3-9x50 on a CZ 455, what would be a good mount and or rings. 1 piece? 2 piece? Kinda clueless about scopes, rings etc.
 
I ended up with some two piece see through mounts on mine to allow use of the iron sights. I have the Nikon P22. Don't remember who made them, but they were 11mm dovetails I found on Amazon. Held up pretty well for me
 
In my experience with all CZ rifles, clearing the bolt handle is more of a problem than the objective lens... and then you have to find the right size for the weird dovetail specs. Leopold make a good set of rings that fit well on the 455, but that was with a 40mm objective lens, and the bolt handle could be made to rub the eye-box. But it got my Redfield 2-7 x 40 real low. To remove the bolt I had to lower (rotate) the handle as it was removed.
 
I buy the cheap UTG or Accushot 1" medium on Amazon. I have them on my 452 and 455. They are priced less than 15$ and will not slip with 2 screws per ring.
 
I usually put a 1 pc rail on my rimfires and bolts as it gives me far more choices of rings than the dovetail mounts.

And I usually check with di products first. If not them then usually eveloution gun works.
Granted it ends up sometimes being more than a set of rings only, but I'm fine with that.

https://www.diproductsinc.com/Products.aspx?CAT=4268

Looks like I posted at same time with same thought as Llama bob
 
Probably high rings

I agree with Ballisti that consulting a gunsmith will be the best way to get the correct fitting base/rings for your Nikon PROSTAFF 3-9x50 scope. This pic show's the Ruger base and Warne med. rings. They give a solid lock up, great quality and price. I hope you'll post some pics and a range report when you get the scope mounted. Let me kow if you have any question's on using the BDC reticle.

prostaffrimfire.jpg
 
You must log in or register to reply here.
Back
Top