Opinions on the Ruger Bearcat?

G

gav1230

New member
I'd like to get a plinking .22 for my first handgun and I'm a fan of the single action frame. I've been looking into the bearcat and it looks like a pretty cute little gun. Any of you have one (specifically on of the newer ones) and so far how has it served you?
 
I have one that is "my Wife's", It is a very accurate little gun. Something broke once and it fires out of time. I sent it back to Ruger and the fixed it, sent it back within 2 weeks. All in all a great little gun.
 
I had one. They are very cute little guns. I don't think you would be making a mistake in buying one.

That being said, I agree with those that said you should buy the Single Six. I have owned three or four of them and currently own two. If you want a single action .22 revolver, this is THE single action .22 revolver to buy. Well.... there are better, but FAR more expensive single action .22s out there.

I am partial to the Bisley style frame but any of them would make you a very happy man, not just when you buy it, but 50 years from now you will still be happy with your decision.
 
I prefer the traditional look of fixed sights. Does the Single Six with fixed sights usually shoot to point of aim?
 
Neat little guns but I have no desire for a .22 without adjustable sights. I like to hit what I'm aiming at with ammo appropriate for the task at hand.

Bring out a BC with adjustable sights and I'll be first in line.
 
I've got an old model Bearcat. I keep it for sentiment only. Rugers were crude then also. A slew of better 22 revolvers to buy than a Bearcat.
 
The trigger guard is so small, I have to wedge my finger in. I found the Single Ten to be a much better fit. I now have the Single Ten, and 2 Single Sixes. The Single Ten is my favorite, but the Single Sixes are great, as both are convertibles.
 
My Bearcat did NOT shoot to the point of aim. It shot a few inches low at 25 yards. FWIW: I gave the revolver to a buddy of mine to give to his son. One of the reasons I didn't really mind giving it away was because it didn't shoot to the point of aim.
I had always wanted a Bearcat and was really disappointed that I couldn't have more fun with it. But trying to hold over every target took the fun out of it for me.
I have never owned a fixed sight Single Six, so I can't comment on that.
 
I shoot a single six alot. I do love my Bearcat. I think you should buy one if you like them. They are nice, They shoot good, and they are fun.
 
It shot a few inches low at 25 yards.
Click to expand...
That's very easy to rectify. Just file the front sight down to bring up to POI. A good problem to have... If shooting high or left or right ... now that takes a different front sight or the barrrel turned or front sight bent.

My wife likes her Bearcat. I've shot it and like it too. Only thing that bothered me was the trigger pull which felt like 10#..... I didn't mind the small grip as the .22 hardly recoils anyway. Nice little gun.
 
" Just file the front sight down to bring up to POI."


I am aware of that, it could be fixed, however:

One of the things I have learned over the years is that whenever a sentence starts with "That's Easy" or "Just............." or "All you have to do is.........." I know I am in trouble because in my experience, nothing is easy.

I am not the handiest guy in the world with tools. I can do most simple things, but precision metal work is not one of them. And when you are talking about sights, this is precision metal work. If I remember correctly, the front sight was rounded, so I would want to maintain the curve while taking off the metal. Second I would want the sight to be flat on top and the sides to be of equal height. And I know that I could never achieve that to my own satisfaction. A big part of it would be that I would know I filed the front sight, and every time I looked at it, I would be thinking: that isn't quite right. And I know that if I make a mistake, there is no going back: you can't put the metal back. Finally, I would think that you would have to do this at the range: you would file, then shoot, and see where the bullets impacted. And keep doing this until you achieve point of aim/point of impact. So, you have to take the tools to the range, and have a bench to work from. In order to get the front sight flat and all that, you need something to hold the gun like a vice. While this is going on, other people at the range are gawking and offering you their advice...............

No thanks, I will just get rid of the gun.
 
Great little sixguns! I thought it was too small at first as well. After a few hundred rounds I found my consistency and it is easily as accurate as a Single Six. It shoots to the sights but it is not a big deal at all to file a front sight down to bring the point of impact up.


I am not the handiest guy in the world with tools. I can do most simple things, but precision metal work is not one of them. And when you are talking about sights, this is precision metal work. If I remember correctly, the front sight was rounded, so I would want to maintain the curve while taking off the metal. Second I would want the sight to be flat on top and the sides to be of equal height. And I know that I could never achieve that to my own satisfaction. A big part of it would be that I would know I filed the front sight, and every time I looked at it, I would be thinking: that isn't quite right. And I know that if I make a mistake, there is no going back: you can't put the metal back. Finally, I would think that you would have to do this at the range: you would file, then shoot, and see where the bullets impacted. And keep doing this until you achieve point of aim/point of impact. So, you have to take the tools to the range, and have a bench to work from. In order to get the front sight flat and all that, you need something to hold the gun like a vice. While this is going on, other people at the range are gawking and offering you their advice...............
Click to expand...
You're way over-thinking this. All you need is a little masking tape to protect the barrel from your file. It needs to be a good, sharp mill-cut Bastard file. Not one of those cheap double cut files. Secondly, I've never heard of anyone filing a front sight down and maintaining the round shape. File it flat. It's scary the first time but not really a big deal. File a little, shoot a little. Who cares what the other guys at the range are doing.


Rugers were crude then also.
Click to expand...
That's rather odd. Most shooters consider Old Models to be nicer guns than New Models. While Ruger has never produced a functioning work of art, "crude" is not the word I would ever use.


A slew of better 22 revolvers to buy than a Bearcat.
Click to expand...
Name one of similar size and comparable price.
 
plinker

Plinking implies a pretty high volume of fire, ie, a lot of rounds down range.

The Bearcat is a neat little revolver and I carry mine routinely during deer season while bowhunting as a signal device and a last ditch SD piece. As such, I really don't shoot it that much. It gets carried a good bit, but shot a good bit less. Running a box of shells through the Bearcat is tedious, it's so dang tiny its hard to load and unload. The sights are diminutive as well and can be very hard to see except in ideal light.

Much better would be a Single 6, real sights and easier to handle all around. Volume of fire is still low, as with all single actions. My boy much preferred a Ruger Std auto to one of my cowboy .22's, you could plain shoot more. Too be honest, on a range trip or dedicated plinking session, I'd pick an auto too
 
My old model bearcat shoots dead on right to left but high. I found that using the hyper velocity ammo brings it down very close to point of aim. No problem making cans dance at 25 yards which is all you can ask of a small fixed sight .22.
 
You must log in or register to reply here.
Back
Top