New Cartridge 357 Ring Of Fire

All

Hi guys,
I think you mean the 9x25 Dillon. It is a bottleneck, and offers no additional capacity than the 10mm. Mine is a straight wall ctg.
Dave
 
All

Hi guys,
Doing some more experimenting...I'm going to try these 200 gr.LRN in January. They are not much deeper than the 170 FMJ.
Won't predict a velocity yet, but should be over 900 fps...if they feed properly.
Dave
 

Attachments

  • 2015-11-29 11.34.56.jpg
    2015-11-29 11.34.56.jpg
    169.2 KB · Views: 86
Now you got me curious--how do you maintain consistent and safe headspacing on a straight-walled rimless pistol cartridge with a muscular roll crimp like that?
 
All

These are test ctgs to see if the bullets would actually fit.
These are inert. They have no powder or primer.
Yes, I did go a bit over on the crimp...the actual ctgs will not have such a crimp...
I had issues with earlier ctgs not burning all the powder but I got carried away here...
Thank you!!!
Dave
 
These are test ctgs to see if the bullets would actually fit.
These are inert. They have no powder or primer.
Yes, I did go a bit over on the crimp...the actual ctgs will not have such a crimp...
I had issues with earlier ctgs not burning all the powder but I got carried away here...
Thank you!!!
Dave
Click to expand...
You didn't say that in your post with pic above--I think you should change it if that's what you really meant--cause that pic truly is advocating an unsafe practice (at least without further explanation). Not trying to be rude--that's just how I take it at face value.
 
All

Hi guys,
There's been a delay with the Glock 20 barrel and continued testing.
I have prepared @500 pieces of brass during the down time and past snow storm.
It isn't coming along as quickly as I had hoped, but it is moving ahead. Bear with me.
 
Last edited:
You must log in or register to reply here.
Back
Top