K-31 scope mounting

W

Wrothgar

Moderator
First: Don't direct me to the K-31 forum. I didn't care for it (nothing against the people, it was just a pain to use).

Second: I know where to get the rail and rings.

So... that clamp on mount can be mounted by, say, a technical ignoramus like myself? (it took me 2 hours to put a Mosin bolt back together). And those rings... it says they're for a .22, so, do I have to use a .22 scope for it? Thanks for any help!
 
If you can use and allan wrench then you are fully qualified to mount it yourself! :) It just clamps on as the name implies, it isn't difficult at all. You can use any scope you want to with it, you just have to have rings that fit both the scope and the mount.

Its kind of one of those things that you figure it out as soon as you look at it. If you don't, it comes with instructions.
 
That ring is showing a .22 dovetail base mount for a 1" tube scope and NO, you don't have to use a scope that is specified for .22. Looks like your base the standard 3/8". You can mount any 1" tube scope of your choosing but make sure to have enough heigth to clear the scope bells. In my opinion, an average gun guy should have no trouble. I have and use all the accessaries for mounting scopes and those that don't, can usually get the job done fairly well. Good luck!! ... ;)


Be Safe !!!
 
Last edited:
So, if it does indeed clamp on, is it any good? Do the screws have to be re-tightened every shot or so?

What about this scope? I'm trying to save money but don't want a crappy one.
 
Last edited:
I dont have one personally, but I too am very interested in getting one. I've looked at them and read lots of reviews and talked to people who have them and I have heard they are very high quality and are very sturdy and dont loosen. I've also heard the aluminum ones work just as well as the steel ones. They are good mounts.

The only problem with them is the scope is not centered on the receiver, and there for as longer distances you need to adjust it. However, for hunting applications you wont have to worry about it. You only have to really adjust out past 300 or 400 yards.

privi partisan makes pretty good ammo. I thinks its the same as wolf, just a different brand and less expencive. Its is pretty good quality and i have shot it.

edit- funny that you mention that scope, thats the exact one that I am thinking about buying for my k31. Again, I've read that is a very good scope. For the money its hard to beat and again, you really only need a higher quality scope out past 500 to 600 yards.
 
I have the unit that mounts on the rear sight base along with an inexpensive Brunton scope. It all seems to work well although I do have to adjust the scope now and again.
I LOVE the K31.
Ron
 
Wrothgar
Depending on service, you should always check the ring clamps but for the most part, it's just to make you feel a bit more secure. They do come loose but not all that often. .... :)

I like your choice of scopes and glad to see that they do not exceed 40MM objective. Any on the listing woud be a good choice. .... :)


Be Safe !!!
 
Just fyi, there is an over-the-bore mount made by Rock Solid inc., it will handle weaver based scopes. It is drill and tap.
 
St. Marie Graphics mount

I use the St. Marie's mount- had it on a K31 for 4 years and maybe 400 rounds, has never shot loose and has never changed point of impact. I am a total mechanical ignoramus and managed to get it on and tightened up in about 5 minutes, and it has never needed readjustment.
It's pretty rare to find a piece of machinery that is so user-friendly. Just my experience, others may have had different mileage.
Bill
Oh- for ammo, I bought 500 Graf's 7.5 x 55 brass and use 200-grain bullets, usually over 4895, or even 4831 if they're for my Swiss 1911. Very accurate. One of my favorite things is when the guys with their brand-new 36x-scoped Remchesters walk down the line and go goggle-eyed at the accuracy of the K31. :)
 
Strangely enough, I have one. :D
No, it won't come loose, no you won't have to retighten anything at all, yes the 3/8" scope rail is necessary. Any wider and it will interfere with 100% ejection on the left and would skin your knuckles on the right.

monta2a.jpg


monta3.jpg


monta4a.jpg


This is one of mine. I like the low profile and fixed 6 powere.

K31Mount004.jpg


With more than 3,500 Clamp On Mounts down the road we have yet to have a failure. We have had 4 or 5 complaints on-line that, after first hand inspection turned out not to ours at all, but we actually replaced three of them even though they were knock-offs.
We also had 12 Steel Mounts that missed a CNC cut and it took a full year to locate and replace them, but eventually all of them were accounted for.

And the shop guys here and I use the aluminum mounts, not the steel. My Father began making the steel mounts some years ago because of simple demand and no other reason.

I forgot to add that if you zero your scope at 200 yards you'll shoot from 100 to 400 yards with almost no noticeable change in POI.
The Europeans have used this type of mount since the 1960's.


Latigo St.Marie

www.swissproductsllc.com
 
Last edited:
Okay, so, out of those rings, which ones do I need? There are 4 choices. I need it to match up to that scope (I'm looking at the one on the top of the list).
 
Warne are very good rings, Wrothgar. Actually any 3/8" rail will do from the cheaper Tasco to the expensive Millet Tikka rings. My own opinion is any ring with the least projections at the side. You'll want to keep any of the mounting projections on the outside (right side) of the rail.
Try to get the rings that are the lowest possible for your objective lens. The lower the scope is, the better your cheek weld.
Use a cheek pad if you need to. This one is mine made by the SRDC webmaster. My setup is low enough already but he personalized it and it looks cool. :D

LatRifle-1.jpg


Please post pictures once you're all set up.





Latigo
 
Will do - I just ordered the clamp and the rings.

Now, I'm still shopping for a scope. I just found this one. I was looking at the second one from the bottom that is selling for $109. That one stands out because it is 4x and 12x. The Nikon one is only 4x. Thoughts?
 
I prefer a fixed power scope on my mil-surps. You can find weaver steel tubes on the auction sites very reasonable. They have great glass and fit the style of the rifle.

This is a K4 on a SP mount.
scoped02.jpg
 
Got the mount in today - it took me less than a minute, I couldn't believe how easy it was to install that. Now, lets hope that my scope comes in before Saturday, as I'll be making a trip out there that morning.
 
So I got the scope in - the rings I ordered don't fit it. Thankfully, the stock rings it came with do. Looks like I wasted 20 bucks.
 
You will use them on something one day. Not wasted yet. The St. Marie mount with a steel Weaver K4 has been on one of my K-31's for several years. Very satisfactory.
 
I'm worried - the rings are holding it on, but in just looking at them, they look, i dunno, a little too big. Well, I'll try them out tomorrow. Its not like this would cause any kind of life threatening malfunction - black eye at the worst. I tried pulling on it and it didn't budge, so that's a good sign.
 
You must log in or register to reply here.
Back
Top