Getting ready to reload .45 ACP- school me

Hey bud, you will have fun.

My personal favorites for 45 are Win Auto Comp, 5.8 grains under a 230 to be exact, and IMR 700X at 4.7 grains.

I've tried clays/clay dot and it's decent too. 3.9 grains same bullet.
 
You might just look to ACME BULLETS for some HI-TEK Coated projectiles. Acme has the curing process well in hand. You could also look at BLACK BULLETS INTERNATIONAL they use the same process. Blue Bullets uses a different coating but they are liked by many.

NO LEADING, ACCURATE, NO MESSY LUBE ON HANDS OR DIES, CLEAN BARRELS, SO WHAT'S NOT TO LIKE?

Some say the coated projectiles SMELL, well that an indication that the manufacturers process is not under control and they are UNDERCURED.

Been using them 4 years in 9 MM, 38 SPECIAL, 45 ACP with great success, many at my gun club have converted to their use also. GOOD STUFF!
 
I read in a book by Bill Wilson that his load is the 200gr SWC with 5.0grs of Bullseye OAL=1.25" and any primer. If I remember it runs around 950 fps.
Started using that and never changed it.
 
You must log in or register to reply here.
Back
Top