CZ the best bolt-action for the money?

i havent tried a ton of bolts but i will say i love my tikka in 300wm. cheap and shoots good. the stock does make it feel like a toy but those of us on a budget need to settle occasionally. it seems like there are alot of good cheap rifles out there. the denver basspro is selling abolts in a range of calibers for 499
 
I own one Remington 700 in 7mm/08. It's a good gun, and I'll keep it forever.
My next bolt gun WILL be a CZ. Count on it...
;)
 
Here is another vote for Tikka being the best value for money. The Tikka has a guarantee to shot under MOA with 3 shots with "ANY" factory ammo where most others with a accuracy guarantee will only do it with "Match Grade Ammo".
The Tikka's trigger is also one of the best you will find on a factory rifle (no need to put an after market trigger on a Tikka). IMHO the best factory rifle would have to be a Sako the Tikka's are made by Sako and they share the same barrel but the trigger on the Sako's are a tiny bit better, the Sako also has the best accuracy guarantee around (5 shots under MOA with "any" factory ammo).
Best value for money factory production rifle on the market TIKKA.
Best factory production rifle on the market SAKO.
You really cant go wrong with a Tikka or a Sako.
 
Last edited:
That CZ is a quality rifle. I've looked them over a time or two, and I like them. Back in the early 90's I owned a Mark X made by the CZ factory, and overall the rifle was very nice, too bad I didn't know what I had!:(
 
I suspect that today the accuracy of these commercial rifles are on a par, with ammunition that each one likes. I suspect if one were to take 100 Savage rifles, 100 Reminton, and 100 CZ rifles one would obtain similar accuracy from the group, some in each group outshooting others.

After accuracy though, one has a number of other factors which may factor in to his affinity for one or other of these manufacturer's offerings.

The CZ rifles I own have an outstanding fit and finish. As I am partial to walnut, I have walnut stocked rifles. The wood to metal fit is imeccable. The wood is very dense, doesn't take compression hickeys easily. The wrist of the rifles I have is at a perfect angle, with a smaller diameter, no nasty palm swells. The checkering is without flaw, no overruns.

The barrels are hammer forged on my centerfires, and neither of them has ever had an issue with metal fouling. This is nice, as I really don't have the patience to spend hours removing that stuff. My rimfire is magnificent.

The action is where the centerfire CZ really shines. The controlled round feeding is very positive and reliable. Ejection is consistent and due to the fixed ejector, I can either cycle the bolt quickly and cleanly eject a round, or cycle it slowly and just sort of tilt the empty a bit in the action for easy removal with my fingertips. No silly spring loaded, bolt face located, button ejector that dents the brass neck on the chamber mouth upon extraction.

The blueing is deep and rugged and no streaking or anything like that.

The triggers are unique among rifles IME. They have a set trigger feature if you like that kind of a thing, and the standard trigger is on a par with any other you can find.

The aspect of the rifles that I would change is that the safeties work backwards from most others I have known, in that one rocks them to the rear on the 527 and the 452. (Right now don't remember the 550, whether it rocks forward to fire or to the rear to fire).

The action has dovetails machined into it for a very secure mounting of optics.

Anyways, when I am ready for another bolt actioned rifle, I will buy another CZ. I'm thinking next I would like a Mannlicher in 6.5 Swede. Just magnificent rifles.

Of course none of the other rifles is a bad choice if the Savage, Remington, or FN appeals to you.

Regards,
Stubb
 
Back
Top