10-22 trigger

[wingman]

I have a heavy barrel 10/22 with Boyd stock sent trigger/bolt group to Randy at CPC and for $135 he did trigger polished bolt and pinned firing pin it now shoots constant one hole groups at 50 yards with most ammo especially wolf match. The trigger is 2lbs perhaps a little low for hunting but I use it for target shooting out to 100 yards.

http://community-2.webtv.net/RandyAtCPC/CPC1022BoltRework/index.html

 

[Superhouse 15]

I have had good luck with the Clark stuff from Brownell's. A hammer from them and some careful polish work following all the directions already given will do wonders for the 10/22.

http://www.brownells.com/.aspx/pid=5020/Product/RUGER_reg__10_22_reg__DELUXE_HAMMER_TRIGGER_KIT

 

[mds2004]

First you have a good wife, and second the parts or trigger housing is easy to install. If you want it worked on just send it to http://swampfoxtriggers.webs.com/ratesservices.htm

If you want to do it yourself you can buy a hammer + sear + auto-bolt release + buffer if you want.

If you want to really do it yourself you can just polish the internals which is real easy. Im new to a 10/22 also and just cleaned up my internals while taking a little more from the hammer to make the pull less than 3lbs.

I also dremeled out the bolt release so I did not have to buy a new one for $10, and then I made my own buffer out of 7/64" windshield fluid line and 3/16" rivet to put inside the line. The bolt was also polished and chamfered with the dremel. After I do the JB Weld trick to take up the pre-travel I will be content with the gun. Oh and I also spent $10 on an extractor to make it more reliable + $15 on a used Tactical Solutions mag release. So less than $30 dollars and I have a great trigger.