Just thought I would mention my "yote" lodin technique. Well several years ago I picked up some Ramshot "Xterminator" . With a name like that it must be good. I started loadin for my Bushmaster with a 1 in 9 barrel and ended up with the following load: Sierra 65 gr Gameking , Remington 71/2 Primers , 24 grains of Xteminator . Shoots very good in both my AR's , my son-in-law's Mini-14 , and my partner's Ruger AR. I now have my dies set up on a dedicated turret on a Redding T-7 and regularly produce a few hundred at a time. I throw the powder with a Redding Model 3 . The maximum variation I have measured is about .2 grains . This load shoots an 1" to 1 1/2" in most AR's I've tried and about 2 " in my Son-in-law's Mini . Not Bolt action clover-leafs but good enough to eliminate Hogs and yotes at 223 ranges in West Tennessee and Mississippi.
I started using Xterminator because it was easy to find and it often is a little cheaper than other powders I have tried. I have also tried "Siellier and Belliot " small rifle primers with the load above and they are about as good as the Remington's .
Just some thoughts
I started using Xterminator because it was easy to find and it often is a little cheaper than other powders I have tried. I have also tried "Siellier and Belliot " small rifle primers with the load above and they are about as good as the Remington's .
Just some thoughts