Winchester model 12 skeet grade? engraved

[bijj62]

Hi I'm brand spankin new here, My reason for joining was to hopefully gain a little information as to what exactly I have. I know its a model 12 made in about 1953 no choke designation but I believe this is a factory Cutts comp. But what I dont know is what grade it is. Ive posted some pictures and I hope they are good enought for you guys to judge. I can get more if needed. Thanks to all that have taken the time to read this.

 

[bijj62]

Serial number 13756xx and some more pics.

 

[zippy13]

Greetings bijj62, and welcome aboard

You're most likely correct about the jug being factory installed because of the lack of a choke marking on the barrel. I'm no expert, but I doubt it's a Skeet model because the barrel is without a rib (solid or vented).

Here's a link you may find helpful in identifying your gun.

 

[bijj62]

Thanks for the reply Zippy. I've checked out that website but its not working for me. I'll try again later. When measuring the barrel on this gun do I include the Cutts? It is approximately 22" to where the Cutts begins and 26" to the tip of the Cutts (not including the choke). Ive sent pictures to a known Winchester engraver and was informed this probably wasn't a factory engraved gun. I'm curious as to what possible (ballpark) value this gun has. Thanks again