Did a search and didn't turn anything up. I have a 94ae chambered in 44mag that I just love. Problem is that the magazine tube is getting very loose. I have checked the band and it is as tight as I am comfortable getting it. I'm sure I'm not the only one to experience this problem, and I'm sure there is a simple fix... it just hasn't come to me yet. Any advise is appreciated.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Winchester 94ae magazine loose
- Thread starter Canardman
- Start date
.
In what way is it loose ?
If the slot in the magazine tube wall's not right, the tube can be removed & a new (but undersize) slot can be filed/cut into the opposite magazine wall.
If that's the option, I would suggest sliding the upside-down tube into place manually, so it can be marked or spotted (with a small drillbit) in place, to get correct positioning fwd/backward, in relation to the receiver face.
.
In what way is it loose ?
If the slot in the magazine tube wall's not right, the tube can be removed & a new (but undersize) slot can be filed/cut into the opposite magazine wall.
If that's the option, I would suggest sliding the upside-down tube into place manually, so it can be marked or spotted (with a small drillbit) in place, to get correct positioning fwd/backward, in relation to the receiver face.
.