Will Uberti parts work on my Euroarms Remington new model army

B

blkpdrkid

Inactive
I baught a Euroarms Remington New Model army revolver and am having a difficult time finding extra cylinders. some one sayed parts from Euroarms and Uberti part will interchange. does any one know if there is any truth to this
 
Euroarms is Armi San Paolo.

You are best advised to call a parts house to verify compatability.

VTI, Dixie Gunworks, Winchester Sutler, or Deer Creek (Waldron Indiana)

I would talk to them on the phone. You may want to be prepared to tell them precisely how long your cylinder is.
 
Pietta BP cylinder was too long for my Euroarms. When I sent gun to Taylor's for a conversion cylinder they used a R&D made for a Pietta. Go figure.

Doc's advice should be heeded. Find a parts house, give precise dimensions, and ask their help.
 
Nobody's parts are going to be drop in. You may find some that can be fitted with a little work.
 
Agree with Hawg. Plan to do some fitting and be grateful if it needs it. That way you can make sure it works right the first time.
 
I had a Euroarms Remmie that had a horribly machined cylinder that locked up the gun after two shots due to extreme shaving of lead from poor allignment of the chambers with the barrel. A spare Uberti cylinder dropped right in and functioned well. The only difference was the gap was about .009" rather than my desired .003-.007".
 
You must log in or register to reply here.
Back
Top