Will it possible to make Daniel MK18 29 inches long?

[Tool]

Current the overall length of a Daniel MK18 is 26 3/4" at the collapsed position:
https://danieldefense.com/mk18-sbr.html

Is there a stock that is 3 inches longer than the factory one, so that I can make its overall length >29 inches and meet my State's SBR minimum length?

Thanks.

 

[zukiphile]

My A1 length stock is more than three inches longer than a waffle stock at 10 inches. The A2 will be a half inch longer.

 

[rickyrick]

Wouldn’t it still be an SBR with the 10.5 barrel?

 

[Tool]

Hi zukiphile,

Many thanks for the recommendation.

 

[Tool]

Wouldn’t it still be an SBR with the 10.5 barrel?

Yes, it is, but it will be compliant with my state laws. In the state where I live, an SBR that is < 29 inches long at the collapsed position is flat out illegal.

 

[Tool]

My A1 length stock is more than three inches longer than a waffle stock at 10 inches. The A2 will be a half inch longer.

I think you are correct. Many thanks.

According to Daniel Defense website, the factory Butt stock is 7 inches long:
https://danieldefense.com/daniel-defense-collapsible-buttstock-black.html

The CMMG A1 Stock is 10.25 inches long (3.25 inches longer):
https://www.primaryarms.com/cmmg-ar... A1,provide ultimate stability while shooting.

 

[tangolima]

Or limit the collapsed length of the stock. Glue some spacer to the end of the buffer tube.

Where I live I have to make the stock non field collapsible. It is still resettable with tools.

They just try anything to make everything difficult, hoping we will give up and give in.

-TL

Sent from my SM-N960U using Tapatalk