Will a Hogue Handall Jr. Fit on a KelTec P32?

J

JMB

New member
My father has a KelTec P32 but the grip bites into his hand a bit. Just curious if anyone has tride putting a Hogue Handall Jr. or any similar device on their KelTec P32. I emailed Hogue, but the person who responded didn't know if it would fit or not.

Thanks for any help you can offer.
 
Considering a handall Jr. will fit on a kel-tec p-11 fairly easily (took me 10 minutes to get it on) I would imagine it would be too big to fit snugly on a p-32.
 
I bought a Handall jr. for my P-32. You have to trim a little rubber off the bottom for a custom fit. It's not completely immovable, but certainly tight enough. The best thing is that it makes a world of difference in comfort. I've noticed posts from several TFLers who have put the Handall on their P-32's. Works well.

Will

------------------
Mendacity is the system we live in.
 
Bad idea.

WHY? It's a CCW piece. That can interfere with your draw from IWB, clip, or pocket holster.

A firearm instructor's shaking his head right now. :O

------------------
The Seattle SharpShooter - TFL/GT/UGW/PCT/KTOG
 
I must agree with the last poster. The "grip" helps comfort but can stick to the holster and also can slide over the magazine release.
 
In addition to being a problem with concealed carry, I don't see the need for the Hogue on the P32. It's a very soft shooting pistol, expecially considering the light weight. My NAA Guardian is harder on my hand than the Keltec P32, and it's almost twice the weight. The locked breech makes a big difference in apparent recoil...
 
Today I tried my P-32 with and without the Handall. I still like the way it feels with the Handall. I was concerned when I read that the Handall might slip up and cover the magazine release. I don't think this could happen on my pistol. (Maybe the mag release button on my P-32 sticks out a little more.) I also tried drawing the weapon when using the waist-band clip instead of the pocket holster. Again, no problem.
Being that the mag release is plastic, I wonder if it will wear down a little and in time, allow the Handall to slip up over it. I'll let you know if it does.
Also, I just can't get the new metal guide rod to work as smoothly as the stock plastic rod. I've polished and polished with my Dremel tool, the rod shines like a mirror but the pistol just doesn't operate as smoothly with the metal rod. I've re-installed the plastic rod.

Will

------------------
Mendacity is the system we live in.
 
I have been trying one on my P32 as well, and I had to trim a little off the bottom, which cut into the palm swells. In any case, it didn't fit as tightly as I'd like it to. I think I'll leave mine off, and chalk it up as a $7.49 lesson learned.

However, the NAA Guardian finger extensions make a GREAT addition to the P32.



------------------
Glock 19
S&W 629 Classic
KelTec P32

"Oh yeah? Well I talk LOOOUDLY! And I carry a BIIIGGER stick! And I'll use it, too." -Yoesemite Sam
 
You must log in or register to reply here.
Back
Top