Who does trigger work to CZ set triggers?

S

stubbicatt

New member
Looking to get some of the non set trigger creep out of the mechanism, wonder if anybody here knows anybody who works these triggers well?

Thanks.
 
Stubbicatt, if you haven't already checked this out, you'll find a good DIY guide here for adjusting the set trigger.

CZ 453 Varmint

cz453_03.jpg


CZ 527 Varmint

cz527_02.jpg
 
Did you try to set the mechanism yourself? the screws are there and the manuals usually show how to adjust it. I never did because my 527M set trigger was perfect right from the get go. if you want to try it yourself, and want some expert advice, call 1-800-855-4486 and press for gunsmith OR parts - they should be able to help out.
 
No Armoredman. I have not attempted it. I am reluctant to remove the action from the stock due to concerns about shifting the bedding. The rifle shoots so very well, other than a little creep on the standard, non set, trigger. I am a big fan of these rifles, and do not think anything I have shouldered made in America in the last 70 years even comes close. My grand dad's Model 54 Winchester is a super rifle, with its "nickel steel" barrel. But this CZ550 in every way is superior.

I shall endeavor to remove the action from the stock and, utilizing the link posted above, get this set up the way I want.

As far as Angus Hobdell, I contacted him maybe 2005 or 6 about work I wanted done to my IPSC pistol, and found that interaction less than satisfactory, and would be reluctant to spend my money with him. Thanks though for the lead. :)
 
You must log in or register to reply here.
Back
Top