what shell to cycle Saiga 12 reliably

M

mo84

New member
I was wondering what brand and OZ shells will cycle my dads new saiga 12 gage. We plan to take it to the throw your own skeet range where any size shot short of buck shot is acceptable. I am hoping 7 1/2 oz shells will be strong enough as they are the cheepest ones we can find, I think they are remington. I am not sure how picky these guns are so any advice would be great help. Thanks alot
 
Many Saiga 12s will not cycle low power shells when new. First open the gas system and look for the ports from teh barrel to the gas system stick the end of a paper clip through the holes to be sure they are OPEN. You should see 3 small holes. Then reassemble and shoot it. Don't worry if yours doesn't eject every shell. Crank the gas tube setting up on high and try again. If it still won't cycle it may just need to wear the friction points on the machined parts. Mine would only cycle buckshot and slugs until after about 500 shells. Now it feeds and ejects everything I put in it.
 
The bulk pack Remington and Federal should work fine. Don't use the Winchester value packs (seriously, DON'T). So long as it's not the reduced recoil stuff it should cycle an S12 with the gas valve set to the most open setting. Mine usually does without a problem.

Shot size doesn't really matter- whether 7.5, 8, or 9, so long as it's a full power charge it should cycle.
 
Cadiz Gunworks used to do the warranty work on the Saiga-12's. They would make sure it functioned with Federal Bulk to meet their warranty standards. That's the only birdshot I would use for what it's worth.
 
You must log in or register to reply here.
Back
Top