What products would you use to obtain this finish on an AK47

D

DOUGHBOY RACING

New member
What color as well, wood is Walnut
TomsAK.jpg
 
Last edited:


Looks like the metal parts are blued - so a hot salt tank.

For the wood, Danish oil, Tung oil, or "Gunstock" oil. Lots of fine sanding, oil rubbing, steel wooling, oil rubbing, burnishing, oil rubbing....



-tINY

 
Matt from Ironwood has got me using a Low Gloss Tung Oil,, mutiple coats then gonna buff it with a Steel Wool pad, after a few coats it is looking nice, not as dark as I was hoping bur close
 
not as dark as I was hoping bur close
Click to expand...
I put about 12 coats on a carbine stock before I got the darkness I wanted...just takes time waiting for each application to dry. I like the way it brings out the grain though.
 
Yours is sure pretty.

Mine looks like hell but sure shoots well.

DSC_0019-1.jpg


Mine came this way and I frankly never thought to pretty it up.

:cool:
 
You know, it's quite common to stain Walnut to achieve the color you want. One of the last stock I did, I used a Red Mahogony stain. Another, I used a Buckeye stain that's a darker color. As far as the final finish, there are many choices and those of us who have finished stocks, have our favorites. As for me, I just can't get past Birchwood Casey's Tru-Oil. Whatever you get, make sure it will stand up to the weather or rated for outdoor use. Do some experimenting on scrap pieces of Walnut and this might be worth your time. By the way, I have heard more than one GunSmith say that you can't stain ugly old and weathered Birch but it can be done. .... ;)


Be Safe !!!
 
take those old ugly stocks (not the pretty walnut ones) off and clean them with Easy Off oven cleaner and rough sand them, then take them to a Rino, or Line-X dealer (spray on turck bed coating) and have them sprayed. They really turn out neat!
 
Well I looked through every file I could find, I did have a photo of one I had done about 7 years ago. A friend owned a Line-X dealership and I had him spray my carry all with a 2X8 added across the back of treated lumber to add some support and strength and it adhered so well to the wood I asked him to do a old Mini-14 stock, it adhered really good after i roughed the stock up so I pulled the stocks off of a Maddid I had tucked in the vault and had him spray and texture them, it really came out good. I just masked out the areas I didn't want sprayed. Worked WAY better than any "textured" finish spray I had ever tried out of a can.

Traded the Maddid for a Glock so I don't have it to make a photo of now.
Sorry....
 
doughboy...Leave it alone. Someone once told me, "When you're finished, you're finished." I know that's not very astute, but what he was trying to tell me was to stop overworking a project. That walnut stock of yours looks perfect to me. Walnut is already a dark hardwood, so why darken it more? I think what you really need is another rifle project...time to go shopping man!
 
take those old ugly stocks (not the pretty walnut ones) off and clean them with Easy Off oven cleaner and rough sand them, then take them to a Rino, or Line-X dealer (spray on turck bed coating) and have them sprayed. They really turn out neat!
Click to expand...

I agree with using Easy Off to clean oil soaked wood. Bed liner :barf: I recently put a whole lot of effort into stripping off a bunch of black textured paint from a smle sporter stock set (I watched The Ghost and the Darkness too many times and want a rifle like Col Patterson's). Birch can be stained and oil finished. Minwax makes a stain and oil in one can. If you want a tough black finish, theres plastic stock sets out there for cheap prices.

Nice looking AK in the first post. Should an AK look that nice :confused:
 
Is my AK stock Birch?
Click to expand...
dondavis3
First off, it's a laminate but my guess is that it is not Birch but rather one of the asian hardwooods of secondary hardwoods. Tulip or Myrtle comes to mind but at any rate, it would just be a cheap asian wood. Not sure what you have in mind but you can still work with this wood. Note that the resin between the laminate, will resist any staining even with a "Spirit" stain. If it was me, I'd leave it alone. I find that some folks just put too much work into a cheap gun and I certainly mean no disrespect. ... :)

take them to a Rino, or Line-X dealer (spray on turck bed coating) and have them sprayed. They really turn out neat!
Click to expand...
Again, for dondavis3 I have done this on SKS stocks but did not have the luxury of a dealer so worked out of a spray can. Certainly not as good but it is still holding on. They do look good and wear well. That is if you want to turn it into a blacker gun.

DOUGHBOY
Walnut is already a dark hardwood, so why darken it more? I think what you really need is another rifle project...time to go shopping man!
Click to expand...
Staining is used to match or blend the variations in the existing wood, if you don't want the contrast. It is also used to get the tone of the finish you want. In most cases it enhances the beauty of the wood. In some woods, it does not. Even a light stain on old wood can work wonders. That is why I suggested that if this is the finish you want to duplicate, you should experiment on different samples. I can tell you that the tone you are looking at, is a result of staining.

Be Safe !!!
 
KMO that is not mine in the picture I found that pic on the web and want to duplicate it.
Click to expand...

LOL! I'll blame last year's stroke on that...My bad. Well, let's see a photo of what you do have, and then we can all pile on with some real advice...:cool:
 
You must log in or register to reply here.
Back
Top