Wards Western Field model 60 sbp620a - schematics?

[DensityMan]

Looking for shcematics or instructions for assembly/disassembly. This particular firearm has been inactive for over 20 years and is in fantastic shape. It's also my first forray into firearms outside of 22's and black powder, so I want to treat her like a lady. Need to clean and oil her up before I feel comfortable taking her out to the range/woods.

At this point she's been taken down so far as I and another much more experienced friend can get her. The trigger assembly seems to be frozen in place and the stock screw is stuck as well. This might normally nescessitate a lazier approach (like neglecting to clean/oil the inner most workings), but in this case the guard/guide of magazine loading port has become dislodged and without removing the trigger guard this is a real pain.

Thanks,

DM

 

[DensityMan]

Forgot to note that this is also the same as a Savage (or Stevens) 620A or even 520A.

 

[n3twrkm4n]

http://www.e-gunparts.com/product.asp?chrProductSKU=PDF0449

They provide schematics... I think for $.99

Hope that helps you out, their link came from www.galleryofguns.com

 

[baf2003]

you might try putting the whole trigger assembly in some wd40 for about 3 to 5 days. just let it soak and do its job. keep adding wd40 as needed.

 

[DensityMan]

Thanks for the tip/info.

 

[joab]

WD 40 will varnish and/or gum.
Better off using gun oil or machine oil.

Or just spraying it down with GunSubber or brake cleaner and following up with RemOil or Ballistol

 

[DensityMan]

Been using FPS for cleaning and lubing to date. My more mechanically apt friend managed to get the guard back in place last night after I had left for the evening. So for the time being I'll let the trigger guard rest and wait for the schematics.

Thanks again all