Uberti 1873 Cattleman

M

MEATSAW

New member
Are the Uberti 1873 Cattleman SA revolvers any good? I am looking for a nice looking nickel 7.5" barrel SA without having to spend a fortune on a Colt SAA. The Uberti looks good, but anyone have any first hand experience? I am going to be using it for "staged" gun fights using blanks with the Burnet Gunfighters Association this coming fall. In addition to that use I will also enjoy using it for Cowboy action shooting possibly, and of course just plinking. I want one in .45 Colt of course :)

PS I also posted this accidentally in the revolver forum because I did not know this forum existed...
 
I've never fired one, but I have looked at a Uberti Peacemaker in cap/ball at the gun store- appears to be a precision gun made a bit better than the other cap/ball guns by Uberti.
 
I have one and it's one of my best shooting CAS pistols. The cylinder pin has a tendency to come loose every now & then, but that's not a show stopper.
 
I have a Cattleman in 44mag. It has been a great revolver, never caused me any trouble. Ammo is just to high to shoot.
 
Last edited:
I have a 5 1/2" .357 and it's my nicest shooting SA. Mine is finished very well and has lovely grips. Seemingly as with all the Italian SA/C&B revolvers the screws are pretty soft so you MUST have a good set of gunsmithing screw drivers and use exactly the right size bit if you don't want to bugger them up, but beyond that I can generally recommend the revolver very highly.

Check out the similar Stampede (often marketed as a Beretta) if you would like one with a modern transfer-bar type ignition system that will allow safe carry of six rounds.

Cheers,
Oly
 
However, the Rodeo II also doesn't have the Uberti's brass triggerguard and backstrap.
Click to expand...

Brass trigger guard and back strap on a 73 Cattleman since when? I've got a Cattleman and a Cimarron by Uberti both in 44-40. Finish is better on the Cimarron but both are excellent pistols. Neither have brass trigger guards or back straps.
 
If it does have a brass trigger guard and backstrap is that a bad thing? I am a newbie but I am trying to learn fast when in comes to "cowboy" guns
 
If it does have a brass trigger guard and backstrap is that a bad thing? I am a newbie but I am trying to learn fast when in comes to "cowboy" guns
Click to expand...

Not at all. Some folks like the brass and Uberti may make a model with it(not sure) but it's not the Cattleman. Cimarron is on top with stag grips. Cattleman does have case colors but they're faint and don't show up in the pic whereas the Cimarron looks all dark but it has nice case colors. These are both black powder frames meaning they have a screw in the frame under the cylinder pin to retain it instead of the spring loaded button that is usually associated with smokeless frames.
truckstuff008.jpg
 
robhof

Funny thing is brass doesn't affect the gun in any way, and on Rugers; many CAS guys I know pay big bucks to get an aftermarket brass gripframe. The only time brass makes a difference is on the C&B revolvers, when the main frame is brass which is softer than steel and tends to loosen with heavy use.
 
OP: I have the nickel & Ivory Uberti in .45. My favorite revolver. I have had mine for about two years and have never had any trouble with it whatsoever. It shoots great and after two years of pretty frequent use still looks pretty good. Holster wear is tough on the finish but the functionality of the gun is great.
All I can say is when I get ready to buy another one it will be a Uberti. I do wish they made , or would custom make, a matching revolver with a birdshead grip for me but...
 
I seem to recall some Uberti's that were produced with brass grip frames. Don't remember anything more specific.
 
I believe I saw the brass backstrap advertised at Taylor's Firearms website. It might have been on Cimarron's too.
 
I already posted the link to the brass Cattleman model above that's located on the Taylor's website. The picture has a caption describing the brass and so does the product chart.

http://www.taylorsfirearms.com/products/cf1873SingleAction.tpl

First row #700ANK, and the chart shows that all of their nickeled Cattleman models have brass triggerguards and backstraps.
I mentioned it not because it's bad, but because it's a matter of taste.
It also means that it's a two toned nickeled gun which the Rodeo II isn't. :)
 
Last edited:
I bought a Cattleman recently but have not shot it yet (had some problems finding ammo). I am very impressed with the quality and feel of it however.

I have the Chisholm model, .45, New Model, 5 1/2", matte blue finish, checkered grip.

Uberti has 57 different versions of this gun - amazing - with all sorts of combinations of new/old model, barrel lengths, finishes, grips, and calibers. Maybe I'll try to collect them all ;)
 
Uberti

I currently own two Cimarron model P's (Uberti Cattleman) in 4.75 and 5.5. They are pretty nice revolvers, both in .45. They shoot well. The fit and finish of the Uberti's is on par with the Cimarron in my opinion based on the others I've seen. I got the Cim's because they were actually a little less expensive at the time. I recently aquired a USFA Rodeo and though I like the action a lot more I am sad to say the fit was not as good as that of my Cim's. I'm hoping to have that resolved. In any event you should be very pleased with the Cattleman. Shop around for your ammo, it can vary as much as $5.00-$6.00 per box of 50 between stores around here...When it's in stock!
 
MarshalofFortSmith

Meatsaw,
I have owned a nickel plated .45 LC 1873 S. A. Cattleman 7.5 for over two years now. I purchased it from Taylor & Company, Inc. One reason I bought it was to use it in a re-enactment group here in western Arkansas. Considering today's prices I wish I had bought another one or two back then.
It was only $360. :)

If you get the chance check out our website:

http://www.lawbreakersandpeacemakersinc.com

Oh, the weapon looks good, feels good, and shoots with no problems at all. I think you will like it and it will certainly be suitable for your needs. Good luck.
 
You must log in or register to reply here.
Back
Top