Triple P loader

Ken,
The reason I decided to make my own loader (+1 for a buddy) was because the new Triple-P units smell suspiciously like vaporware. It's not that complicated to make your own linked loaders, and MUCH less costly. All I had was a saw, a drill press and some time. Here's my version of a toggle link type loader. If I can make 'em, anyone can. PM me if your want a set of drawings.

loadern.jpg
 
I probably could have made one myself. I have one from Track of the Wolf that's made of aluminum. I don't know who made it; the handle hurts my palm and it can warp when when I use .457" bullets and a cheater pipe on it. It was about $20-$29?

I bought Powder Inc.'s cylinder loader when I bought some powder last week. It's robust and simple, but sort of crudely welded. I could have built one, but it would have taken more time and skill than I have. It gets the job done and it comes with all the extra arbors you need and you can rig it to cut wads, since the arbors and stuff are threaded for easy swap out, which is a great idea. I think it's worth it's price, about $69 including shipping to my house.
 
Triple P Loader

Can you load yur Rev with only one hand?(mines do to injury and surgery) I can now cause a havin' a Triple P multi mfg. and model cylinder loader an punch press... I have the ol single loader too...helped tim with dimesions and info for these presses. As far as I know there was a health issue and haven't talk to him myself...
When did Powder Inc start selling loaders again? Got a picture of it if recent?
Thanks in advance...
 
But the guns come with loading levers...

What am I missing?

Or, what are you guys missing?
Click to expand...

A stand alone loading devise allows much better control on loading conicals, on bullet seating depth, and in the case of that one handed outlaw SG, it allows him to keep the posse at bay.

For normal plinking the loading lever is fine. Some of the Colts did not have a loading lever, some guns, like the LeMat have a fairly light loading lever. Lot's of reasons to own a stand of some type. From a basic one that just holds the gun in a upright position to a full fledged loader.

PICT0011Small-1.jpg
 
DustyBottoms said:
But the guns come with loading levers...

What am I missing?
Click to expand...

I have Rugers, Remingtons, and Colts and the loading lever is all I need. I have plently of leverage to compress powder and seat a ball. I rather enjoy using it the way that Mr. Colt designed it therefore I don't own a loading press nor desire one. However, there are a few revolvers that make difficult work of loading conicals because of clearance issues. Also, there are those who have a cache of spare cylinders that they want preloaded. In both of those cases it would seem to make sense to have a loading press.

p.s. I've read in a couple of threads where the owner of Triple-P has taken money but not delivered products. Also, that he hasn't honored the lifetime guarantee he gave. Basically, he has disappeared off the face of the earth....just what I read....don't know if any is true.
 
Thanks for the inside info. on the triple P. Looks like I'll go with the Powder Inc. one.If there are any negatives on this loader, please come forward as I'll plan on ordering next week. To bad on the Triple P .It looked pretty nice as does the one made of wood. I'm just not real good with wood. Ken
 
Some guns make it difficult to load conicals. I find it difficult to line up my sprues once the chamber is under the rammer. It's also easier and cleaner to load lubed wads with a press.

I have three cylinders for my Remington, it's faster to load them on a press, but I don't bother using a press for my Colts, since it's a more involved process to swap them out and I really like the Walker's loading lever.

Here's pics of the loader I got from Powder, Inc. last week. They're not studio quality, but I hope you get the drift.

DSC02158Large.jpg


DSC02164Large.jpg


DSC02163Large.jpg


DSC02162Large.jpg


DSC02160Large.jpg


DSC02159Large.jpg


Big nasty looking weld. It was off putting they didn't even put it in a box, they wrapped the instruction sheet around it and wrapped it in newsprint and put it in the box with my powder in a 25# box. The arbors and cylinder pins were in a plain ziploc quart bag. I hope that I can adapt it to cud wads one day so I don't have to hammer them out, I can use the press. The press is threaded to take the arbors and the base is threaded to swap out cylinder pins.
 
I went to the loading press because I wanted to try conicals in my replica R-58 without having to modify the gun. And, like Smokin Gun, I don't have full use of my hands and the loader is a welcome aid. I was amazed by the increased accuracy (luck?) achieved with the loader and conicals (LEE 200gr REAL).
 
Powder Inc.

Does not look exactly like the one at Powder Inc. Web Site. A little crewed to say the least. Is that discoloration rust or some type of oxidation. Is the metal stainless or of a metal that would have to be protected somehow. I guess as long as it works is the main thing. Ken
 
It's sort of a "patina", I hope. :) It came covered in oil, but it was still rusty looking, straight from the box. I could have built one, but mine would have looked even sloppier and would be in the "get around to cutting that metal out" stage for months.
 
You must log in or register to reply here.
Back
Top