This thread got me remembering a change I've been wanting to make to my Romy Tok since I took the safety off, as it used to have the same problem with it jumping into safe on recoil. It is a pretty common issue. Taking the safety off leaves a big hole through the frame of the gun. I prefer the look of the safety in place rather than having a gaping hole through the frame, so I wanted to try to fix it into the fire position permanently, and forget about it. I had a couple of P-64 safety plungers and they are the right diameter to fit in the hole in the safety lever, but they are way to long. I took a dremel to one of them and shortened it to a length that would allow it to fall into place, but be too tight to allow the lever to move from the fire position to the safe position (I put it together in the fire position, but it could just as easily lock it in safe position if installed wrong). So now I have the safety filling the hole again, but it won't move. Good enough for me!