I FINALLY got my 1895 Chilean Mauser refinished and am installing the parts. I have a Timney trigger for it, the gold one with adjustment from 1.5-4 lbs. I have misplaced the instructions though, and couldn't find Timney Triggers on line any more. Can anyone tell me where the new website is, or just cut to the chase and tell me which of the two set screws to adjust to reduce the trigger pull weight? It feels closer to 10 lbs right now. Thanks!
Timney Trigger adjustment question
- Thread starter jmstr
- Start date
www.timneytriggers.com Also "feels close" is not going to get it. You will need to borrow, build or buy some way of measuring the trigger pull.
HTH
HTH
This article from Real Guns is on the Remington vesion, but there may be some usefull info.
www.realguns.com/archives/060.htm
Good Luck...
Joe
www.realguns.com/archives/060.htm
Good Luck...
Joe
Art Eatman
Staff in Memoriam
A long piece of string and a two-pound sack of sugar will tell you if you're over or under. 
I happen to have spring scales for the purpose, but there are plenty of known-weight items you can hang from the loop of string.
Art
I happen to have spring scales for the purpose, but there are plenty of known-weight items you can hang from the loop of string. Art
Thanks all! I finally got it resolved. I've had to move twice since this post began. It feels very good now. Unfortunately I now have to figure out something about the sights. I put a nice laminated stock on it with a high comb and it has peep sights [which I could never hit the broad side of a barn with in the first place]. I can either cut the stock's comb off and use the peep sights or try to attach a scope [scope it my preference].
Thanks again, and sorry for the delay in responding.
Thanks again, and sorry for the delay in responding.