Thrift store find

M

MarcB

New member
I was getting dragged by my wife into a thrift shop last week. Found a funnel that I thought would work on my 50-140. Just tried it out and it works great. Now no more spilled powder. Best part was it was only 25 cents.
 
There's other things in Thrift Shops for BP shooters & hunters.

I paid $3 for this leather bag, to which I added a strap and fru-fru to make a possibles/hunting bag

dscn0801wp.jpg


And $1 for this - What used to be the hollow handle of a silverware butter knife, that I fiddled & added a spout to, so's I could have a priming horn (?) for my flintlock.

dscn0906l.jpg



.
 
Second hand stores are the best places to find pewter that I know of. Last time I visited one. Someone in the same frame of mind cleaned out its pewter shelf. Disappointed_:(. But I continued my search. HOLY Mackerel I found a full box of C0-2 cartridges (cheap) for my B/P barrel discharger._:eek:
The visit was still worth while after all._:)
 
The secret is out !!!

There's other things in Thrift Shops for BP shooters & hunters.
Click to expand...
PetahW
I have picked up bags, staps, beads, horn/antler, old knives that get turned into patch knives and once even found a capote. I'm always on the lookout for old wood handled and jig-boned knives. Have to admit that I do get some strange looks when I buy the leather handbags. I no longer bother to explain. By the way, that is a handsome Seneca. Is it a .45 or .36?

Thanks for the picture and;
Be Safe !!!
 
Last edited:
.

.36 ? I wish...... :( Naw - It's a .45cal . :p (My state's hunting mandates " .40 cal & over for deer/under .40 cal for small game")

(Although I have a .36cal rifle, too - an underhammer ;) )



.
 
Yep old wool felt hats make good wads. I never find anything at the thrift stores around here. I paid a dollar for this huge old thick leather purse once. Was going to use it for knife sheaths. Got it home and cut into it and it was some kinda imitation leather:eek: Looked and felt like the real thing.:confused:
 
At a thrift shop I purchased a "wooden rifle" for $25.00-25% off that day. It was a complete stock-with barrel bands swivels and buttplate for an M1903.
 
On my last stop at the Thrift Store, apparently the word has gotten out about pewter, because there were 3 other guys already there, walking around the picture frame and tea serving set aisle, discretely trying to scratch things with their thumbnail and trying to bend the corners to see if it might be pewter.
 
Ya Got me wondering.

Okay guys, Ya got me thar !!!
What is the attraction/usage for pewter. I know what it is and run into it, all the time. Just never gave it a second look or thought. ..... :confused:

Be Safe !!!
 
Pewter can be used exactly the same was as tin. (not roofing tin, or tin cans, there is a big difference. Those are actually coated steel).
Tin is expensive. Normally, bullet casters get tin from solder, which is expensive. Tin sells for about $8-$12/lb. Normally, making a bullet with any sharp ridges or several small lube grooves is much easier using a little tin in the lead mix. It breaks the surface tension of the lead and allows it to flow into the grooves better. (About 1.5-3% in the mix will do ya). So if you can get a couple of old pewter mugs, pitchers or picture frames at the thrift store for a buck or two, and end up with a pound of tin, you come out way ahead because then you don't have to buy solder! :D
Round balls or a round nose bullet with one nice big lube groove doesn't need it. But several bullet designs, especially rifle bullets, can have 3, 4 or even 6 small sharp-edged lube grooves that need some tin to get perfect fill-out of the bullet in the mold.

Something like these 358627s will benefit from at least 1-1/5% tin in the mix.
Picture_zps28435f91.jpg
 
Last edited:
.

Well, for one thing - I've melted down pewter to pour a Hawken/any rifle forend cap/tip.

IMG_0653.JPG


Re-enactors can use pewter to make period buttons for their clothing & gear.


.
 
PetahW: Did you make a sand cast for that end cap pictured? Very nice Sir.
Click to expand...

Gee's did I find a honey hole today.
Sister-in-law called last night right during supper as usual. This time wanting to talk to me instead of her sister. Apparently she found another new thrift shop close to our house. While there she found a old silver colored heavy metal picture frame and a old single speed Bee Hive looking kitchen blender. "Well for the first time in years she peaked my interest gents.:eek:" I asked where she was shopping and was told.
This AM I and the wife took a deliberate ride to this new thrift shop for a look see. Wow!! a new undiscovered business close by. Low-and-behold not one but 2/ larger old heavy pewter picture frames and 1 small picture frame all still left on the shelf. All frames found were nice heavy old American made pewter casts. No Wilton pewter this time, thank Goodness.
Feeling lucky after cherry picking that pewter into my shopping basket. I started my search again. Holy Mackere another find!!. That Waring single speed Blender. Glass jar and all. (Not one of those now-a-days plastic ones.) All metal and made in N.Y.City that Waring was. 6/bucks was its asking price tag.

So at check out I had carried maybe 4 lbs of pewter and a heavy duty old work-horse of a blender (intended for grinding my charcoal) to the counter. Yep the whole Kitten-Kaboodle for 14 bucks. (How lucky can a guy get in one morning.:cool:)
 
Did you make a sand cast for that end cap pictured?
Click to expand...

Poured on the stock would be my guess


I've poured a few butt caps and bolsters on knives but they didn't turn out that nice.
 
You must log in or register to reply here.
Back
Top