Threading for Benelli chokes

Y

yggorf

New member
Does anyone know if it is possible to rethread a Benelli M2 barrel for Benelli Crio chokes? I had a gunsmith tell me today that no one offers a Benelli choke thread tap, so this can't be done without a custom tap.

If I can't tap for the Crio system, can I use a Tru-tube choke tap and tap for Tru-tube chokes?
 
Different choke systems are needed for thin barrels:
..a) I am set up for 12 ga Rem Choke in a few pilot sizes. 32 threads per inch system. I need a barrel to be .845" diameter.
..b) Winchoke is also 32 TPI and needs .845"
..c) The Tru Choke system with 44 TPI needs at least a .825" barrel muzzle.
..d) The Tru Choke Thinwall also with 44TPI needs at least .805"

If the bore is off center, things are measured based on the thin side.
 
You must log in or register to reply here.
Back
Top