Thinking "inside" "the box" these new box style holsters ...

OK... a while back, I bought a new TCP 380... it came with a "bulldog" holster, a pretty thin / light weight nylon black "box"... basically a 5" x 5" X 1.5" box that clips to your belt... I don't think I could stand to carry in that poor excuse for a holster... but my biker buddy bought one shortly after, & wears it everywhere, & claims no one has ever even asked him what it was... IMO, it's too big for a cell phone or a PDA... it's difficult to get the gun out of, & the belt loop ( forget about the included clip ) is too narrow for sturdy carry...

OK, that was my rant about the included holster that came with the little Taurus...

Well... I'm a budding hobby holster maker, & am making holsters for my close shooting friends this year for Christmas... I asked this guy, what he'd like a holster to fit, & he replyed, one for his double derringer in 38 special...

so... I'm starting "inside the box" & decided to build him a black leather box holster, but obviously much smaller than the one that came with the 380's... hmm... why not make a "cut out" in the front, to make getting the gun out easier, then make a flap cover... hmmm... an inset also in the front, would actually keep the gun in position better in the box, & offer up a 2 cartridge reload... my original box pattern I did in leather to start with was much smaller than the 380's, but I found I could make it a 1/2" narrower, & a 1/2" shorter, so I started a 2nd one... now the box is about 1.5 - 2 times the size of a pack of cigarettes, I made the belt loop full width of the box... so far I'm just stitching stuff together & fitting pieces, then will cut it all apart again & dye it black... being more complex than some of my other projects, I need to figure out the best sequence to assemble it ( sewing in a square cornered bottom on a 1" thick box is going to be at least challenging... btw... that 1st pattern is just the right size for my birds head grip S&W top break snubbie in 32 S&W, so I'll have to finish that one for my lil revolver, after I get the Christmas presents done... wonder if I can find room for 5 cartridge loops ??? probably, since the gun only has one barrel, & the 32 cartridges are so much smaller than the 38 special rounds, coupled with the fact that this box will be bigger...

open carrying, in a package that no one suspects is a gun, could be nice on days that I want to tuck in my shirt...

Thoughts or comments ???

anyone else carrying in one of those boxes ??? ( I think the company makes them for other guns )
 
Last edited:
this thread will likely be dead in the couple weeks that it'll probably take me to finish the holster, but I'll for sure post pics somewhere here...
 
I use an old Cannon camera belt case as a OWB holster for my LCP. Nobody pays it the least bit of attention. Very secure for the gun and can be easily moved around the belt for different positions while driving/walking etc.
 
holster

sounds like a design my trooper buddy was thinking of for his Kel-Tec .380. I know that Cabela's offers something like that. Good luck and will be watching to see how it comes out.
 
To make the gun truly accessible with a customary grip, it would seem that enough of the box would need to be cut away (maybe fall away when the flap is unsnapped/unhooked?) that it would be dangerously close to open carry. Interesting problem, I would be very happy to test it for you with my LCP. :)
 
this 1st one being a birdshead grip derringer, I only need to cut away enough of the front of the box, to allow the index finger to wrap the grip... same with my birdshead S&W revolver... the compact autos, with thier short grips should be similar... I'm just trying to keep the cutaway about 1/2" away from the edge corner, so the holster retains the correct rigidity... if there was room ( on the bigger boxes ) a 2 finger wide cut out would allow for a faster draw... but on this very small box derringer holster, I better keep it one generous finger wide... the Bulldog holster boxes that come with the Tauri, don't have the rigidity to do a cut out, & they are a royal pain to get the gun out, for someone with larger hands...

BTW... pretty cruddy weather outside right now, so even though I have some outside work to do, & will be busy on Sunday, maybe I can find a couple hours to spend in "the man cave" & bring it in for a couple pics on Monday, just in case I haven't been good enough at describing what I'm doing...
 
well here are a couple "in process" pics... I don't have the cartridge loops sewn in here, but you can see the inset that will hold the cartridges... if I trim a little more off the bottom, the wearer will be able to "pop out" the inset, making the cartridges easier to remove from the loops, if a reload is needed...

attachment.php


the fold down cover will cover up all visible signs of the gun or cartridges...

attachment.php


the belt loop on the back is much sturdier than the bull dog holsters, & I've had bad expiriences with clips, so I don't generallly put them on...

attachment.php
 

Attachments

  • guns 412.jpg
    guns 412.jpg
    54.8 KB · Views: 287
  • guns 413.jpg
    guns 413.jpg
    49.7 KB · Views: 284
  • guns 414.jpg
    guns 414.jpg
    54.2 KB · Views: 294
worked on it a little last night, cut it all apart, & dyed the leather, figured out the cartridge loops, & sewed the bottom back in for good ( I hope )

attachment.php


attachment.php
 

Attachments

  • guns 418.jpg
    guns 418.jpg
    52.1 KB · Views: 193
  • guns 419.jpg
    guns 419.jpg
    53.7 KB · Views: 196
Looks a little like the pocket holster I use. I bought mine - didn't make it, but the idea of giving a "wallet type" print is the same.
 
Back
Top