"Testing" vs. "practice shooting" saga

R

Road_Clam

New member
Like many handloaders I have a deep passion for consistency and precision. I am constantly in the hunt for that specific gun's "magical combo". I load 18 different calibers and thus far have 966 loads tested and documented. I keep saying to myself "I need to spend more time practicing than testing" Yet seems most of my range trips is spent testing a "new combo". I think I have about 11 combos in queue I need to test. It just never ends. A perfect example of the ongoing saga is my M1 Garand, I spend a lot of time testing 155-175's looking for a precise load, found a great load with 168's and 4064. Now as of late just randomly browsing the CMP board I read of a potentially precise load using 100-110 gr flat base bullets from some highly credible sources ?? So following the passion I gotta' try this ! More fun "practice shooting" range trips bumped in favor of testing. No wonder i'm stuck being just an amateur shooter, but at least i'm a poor shot with consistent loads, so no excuses ! :D Am I not alone ?
 
If your testing involves your human error in holding and trigger pull etc, your testing is practice.

If not, testing should be pretty quick and you can get back to practicing.

If you have a platform that is stable enough you just fire to the target and measure the results.

Like the one hole 3 shot group at the last 4 seconds of this video.

https://www.youtube.com/watch?v=PG13s1bj-jw
 
Road Clam:
I am like you, but I also feel that I am "practicing" while testing. There are only so many ways to make shooting at paper interesting. Since injuring my knee, I haven't been able to do any action shooting. One has to do things to make shooting interesting. I find it satisfying when I retrieve my target with a tight group which tells me that I was focused on that front sight, had a good trigger pull and found a good load. I say keep on testing, reloading and enjoy yourself. If you need more reinforcement, just think about what the shopping malls are like right now.
 
No you are not alone. I have yet to figure out if its me or my loads wander as I sometimes get really good ones and then they go off. More me I think but....

I reload to shoot. My testing records are pretty poor and I keep trying to work out how to get it down. Lately its just start over and log the results better.

I don't mine reloading but I live to shoot. How I would feel if there was low cost accurate ammo? Not sure, there is not so not to worry.

I finally think I have the range of what affects things though I have yet to do some of those things (or get the equipment)

I am doing 3 calibers and 30-06 has too many guns. Right now I am focusing on real accurate.

I need to get back to Mil Surplus and see what I can do there.

It never ends, good thing.
 
My testing is practice. At every test session I give my dead level best to hold the cross hairs on a specific point on the target each and every shot, squeeze the trigger and call my shots. Without the knowledge that each shot taken is as close to the last as possible, I have no confidence in the results of the test.
I get a lot of practice because I too never seem to stop testing. That my be due to the fact that I haven't found the load I'm looking for.
 
I haven't reloaded a single round for 2 years. I was spending time reloading that could have been put to better use and I had more reloaded ammo than I could possibly use.
 
I guess I should have explained in better description. I was speaking from handload testing taking away from other enjoyed disciplines, in particular IDPA type action shooting or rifle action engaging multiple targets, shotgun trap / skeet and so on...
 
I shoot in order to be able to reload.
Click to expand...

That resonates with me^.

I only load for pistol. I can only imagine the quagmire rifle loaders can find themselves swimming in.

I have a way of finding myself knee deep in load development that lasts all through the warm months. Last summer it was 45 ACP load work ups. Next summer, it'll be something else, I'm sure. My range is oriented relative to the sun where winter chronographing can be a bit tricky - so it's only a practical thing to do from March - October. I like range time - any range time. But after a while, setting up the chrono and recording every shot can start to feel a bit like work.

Two days ago, I took my 38 Special "fun gun" (S&W M67 - has no other duty but recreation) out for a shoot. Just a shoot. No experimenting. No tests. Just shoot and have fun. 244 rounds. It was nice. It was also rare. Too rare.
 
Up here in NH i've developed a good winter reloading task regiment so as to allow minimal "redundant" tasks during prime shooting season. I do the majority of my brass cleaning and match brass sizing during the cold winter. This winter's top to-do is converting 223 into 300 BLK . Also want to practice more casting of heavy 540 gr 45-70 bullets for my Sharps . I'm really struggling getting "perfect" casted bullets.
 
I am the opposite and I'm really happy some of you guys can't stop testing loads.
My goals are meat on the table and dead predators. Your testing puts me in the pasture without taking the time to reinvent any wheels.
Thanks guys and I just hope you keep it up and continue to share.
 
I quickly develop a pet load for each rifle and stay with it. I have learned over the years which powders are easy to find accurate loads with and which ones will fight you every step of the way. Win 760 is a powder I avoid like the plague. It is capable of excellent accuracy, but it has always taken me way too many rounds loaded to find it. Imr 4350 is the opposite end of the spectrum. It seems to group at any reasonable charge.
 
I guess I should have explained in better description. I was speaking from handload testing taking away from other enjoyed disciplines, in particular IDPA type action shooting or rifle action engaging multiple targets, shotgun trap / skeet and so on...
Click to expand...

You just need an efficient way to test. Working up loads for a half dozen bullets, using a have dozen powders, to make power factor can take more than a month loading a few and taking them to the range to test, then go back and load a few more.

Take your gear to where you shoot and you will be done in a few hours.

3533895716_0a7f11a958.jpg
 
Take your gear to where you shoot and you will be done in a few hours.
Click to expand...

A lot of folks do this at my range^.

They make their loading equip mobile. Usually, they C-clamp their press to their tailgate, or the benches behind the firing line. Due to the scale, I believe calm days are a must. At any rate, it's not an uncommon sight at my range.

Me? I live only three miles away, so I find it unnecessary.
 
Taking my gear to the range for testing would be ok as long as the wind is calm , my 200 meter range is frequently a wind vortex. No way could I handload on windy days.
 
Even if I could I would not reload at the range.

Worst case I pull rounds that are in poor nodes (or none!)

I just load up whatever the goal is, 10 are seated at my initial test depth the rest are loaded long. I see how they do and then tweak the depth with a RCBS junior I have clamped to a bench (range has deemed I need to treat it like a muzzle loader and its acualy better spot)

Almost always have the 3 x 30 caliber and if I think I will run out of entertainment (err loads) then I have the CZ452 with me and fill in with that.

That said, anyone that re-loads for any reason is good in my book.
 
Taking my gear to the range for testing would be ok as long as the wind is calm , my 200 meter range is frequently a wind vortex. No way could I handload on windy days.
Click to expand...

Why? If it’s because you can’t test on a windy day, I might understand but you can load, test, practice, under lots of conditions.

If you want drama for testing vs practice what better conditions than a windy anyway?

If you notice that powder scale in the photo above is sitting in a cake pan lid, that’s what covers it from the wind. You just have to adapt to the conditions you are in.
 
jmorris said:
Why? If it’s because you can’t test on a windy day, I might understand but you can load, test, practice, under lots of conditions.

If you want drama for testing vs practice what better conditions than a windy anyway?

If you notice that powder scale in the photo above is sitting in a cake pan lid, that’s what covers it from the wind. You just have to adapt to the conditions you are in
Click to expand...

Let me clarify further. "no way would I attempt to HANDLOAD at my range on a windy day". I have NO problem with live fire test in the wind. If I chose to not shoot on a windy day I would never get anything accomplished. Like I stated my 200 meter range which is where I do most all my precision rifle testing is frequently windy.
 
OP I am the opposite. I am very much a "good enough" handloader. Once I get the ballpark velocity I am seeking, I look for the best accuracy node I can find in that area. Once I find it, that's my load. I tend to have just a few go-to powders that have broad ranges of applications.

I do plan to start casting for mil-surp rifles this coming year, though. I suspect that will open up my testing world a great deal, and introduce me to H4895 as a staple powder from what research I've done.
 
You must log in or register to reply here.
Back
Top