Suppressing a FNAR 7.62 x 51 and a regular barrel length AK

B

benfishin

Inactive
I was told by a dealer that I won't be able to adequately suppress my FNAR or my fold under stock AK with the AAC 762 SDN-6. Opinions?
 
I guess with an AK you'd have to suppress the gas tube and the muzzle. The action is pretty noisy as well - heck, just wrap the entire thing in Corning insulation! (but make sure you register your insulation on a Form 1 first)
 
FN LAR's and LF FAL's vent gas out the adjustible gas block. If you Google a You Tube video you can see what the shooter looks like after attaching a suppressor to it.

Solution would be to close the gas block but then you will be hammering your bolt group against the receiver pretty hard.
 
I have no experience with the FNAR, but my 7.62x39 AKM is hearing
safe with a .30 caliber Windtalker suppressor attached to the DC Vortex.
The same AKM cycles Engel Ballistic Research sub sonic ammo when suppressed.

I have an UltiMAK gas tube rail on my AKM and it has the holes in it.
 
I've fired an AK with a suppressor fitted and every time I received a jet of hot gas from the back of the receiver! That recess where the upper receiver engages with the rear of the return spring; I have no idea what was going on inside the suppressor (which worked well), but it was uncomfortable to use.
 
You must log in or register to reply here.
Back
Top