yourotherleft
New member
Can anyone point me where to get some sort of take down manual/parts list on Mannlicher 1905 pistol? Thanks!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Steyr Mannlicher model 1905 pistol
- Thread starter yourotherleft
- Start date
Looked at Numrich?
http://e-gunparts.com
http://e-gunparts.com
yourotherleft
New member
Thanks. They don't have it, but that's one interesting place. I'll bookmark that for sure.
Tidewater_Kid
New member
Haven't found manual or diagram yet, but here's some history....
http://www.littlegun.be/arme autrichienne/steyr mannlicher/a mannlicher 1905 gb.htm
TK
http://www.littlegun.be/arme autrichienne/steyr mannlicher/a mannlicher 1905 gb.htm
TK
It is about as simple as a pistol can get.
Turn the pistol upside down and push down (toward the barrel) on the little tab in front of the trigger guard. Slide the part in front of the tab forward, sliding the bottom and both sides off to the front. With the thumb nail or a screwdriver, push back on the recoil spring guide and ease it up, letting the spring and spring guide come out to the front. Now pull the slide to the rear and lift it up and over the barrel.
The entire works are now exposed and all the parts can be removed by hand. To remove the magazine spring and follower, use a screwdriver to push in on the catch in the hole at the bottom rear of the grip. The bottom of the grip will swing down and forward; the spring can be unhooked and the spring and follower removed.
Jim
Turn the pistol upside down and push down (toward the barrel) on the little tab in front of the trigger guard. Slide the part in front of the tab forward, sliding the bottom and both sides off to the front. With the thumb nail or a screwdriver, push back on the recoil spring guide and ease it up, letting the spring and spring guide come out to the front. Now pull the slide to the rear and lift it up and over the barrel.
The entire works are now exposed and all the parts can be removed by hand. To remove the magazine spring and follower, use a screwdriver to push in on the catch in the hole at the bottom rear of the grip. The bottom of the grip will swing down and forward; the spring can be unhooked and the spring and follower removed.
Jim