Steyr M95 Long Rifle

J

johnm1

New member
So on a whim I bought a Steyr M95 Long Rifle that has been 'Decommissioned' by drilling the chamber (barrel only, the receiver was untouched). It was bought as a wall hanger ($59 USD) and if it remains that way it's OK. But I was wondering if there are any full length (30") barrels out there in either 8x50R or 8x56R? I reload so the caliber is not that important though I do realize that the 8x56R is more readily available as far as cases go. I want to keep this as simple as possible.

I realize I could have a barrel built but really don't want to put that much into this project. Something simple like a barrel swap and check headspace is what I was thinking. I know the dies would cost me out the nose. But somehow die costs don't bother me as much.

Thanks

John
 
Thanks Buzz,

I tried all of the normal places on the internet including that one. They and others advertise the carbine barrels but not the rifle barrels. This may well turn out to be my only non-working firearm. It is a simple barrel profile so I'll price out making one from a blank. I just think it will be more than the gun is worth. I'm going to join up at the Steyr club and see if someone might just have one.

Also, the bolt head has been welded closed and I assume the firing pin either removed or cut short.

Thanks again.
 
It's beginning to look like this one will remain a wall hanger. No luck so far on finding a loose barrel or barreled receiver. I'm trying to see what a local barrel maker would charge to replicate this one. It is actually a fairly simple profile. I expect that will end up being too expensive.

On a lark I did e-mail Steyr hoping they might have a company historian or even an employee who might have a source. I'm not holding my breath of that one though.
 
Were those demilled by the Obama admininstration because millions of them were turning up in the hands of Mexican drug gangs?

Jim
 
No, I don't think so. I have seen pictures of others decommissioned in the same way though. There is an oval shaped cut about an inch long in the top of the chamber and the bolt face has been welded. Kills me as the rifling is near perfect though dark.
 
Hi, johnm1,

Believe it or not, I was being sarcastic. I really don't believe even the anti-gun nuts would consider an old M95 to be an "assault weapon" and a serious threat to national security.

Jim
 
Jim

I knew that. I wonder at what point in time and under what circumstances an old rifle would be decommissioned like that? For what purpose?
 
Chack

I have read of several different chamberings including 7.62 x 54. The Germans re-chambered it to 8 MM Mauser. And that might do if I could get the barrel profile to work. It might even be legal for vintage rifle matches as it had it's own model designation.
 
You must log in or register to reply here.
Back
Top