My Wife and I started shooting steel targets about 6 months ago. We have had no issues when shooting rimfires and handguns from.22 to .45. The problem has been my .308. I have a 3/8, AR500 target which said it was good from 150 yards with a .308 under 3000 FPS. I'm using reloads of 150 grain jacketed soft points and according to the load data should be at 2800 fps. I'm shooting from a 16" barrel, so it is probablly a little less. From 300 yards it is still making a small dimple in the target. So I purchased a 1/2" AR500 target from a different company that said it was good from 100 yards. Well, a 165 grain jacketed soft point at 2500 fps at 110 yards is making a small dimple in it. So I loaded some 150 grain jacketed soft points all the way down to 1200 fps and by golly they worked fine. I did have to aim 12 inches high to hit the taget at 110 yards though. The 3/8 target is made by Champion, the 1/2 target has the Cabelas name on it. Is there a such of thing as a steel target that works as advertised?