You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Steel guide rod for CZ pistols?
- Thread starter Copythat
- Start date
You might try contacting CZ directly to see if they have any of the old-style steel rods in stock (www.cz-usa.com). Other than that you might consider going after market, but these tend to get expensive. Try www.midway.usa www.brownells.com
Search the archives, there was a thread on this about a month back
------------------
So many pistols, so little money.
Search the archives, there was a thread on this about a month back
------------------
So many pistols, so little money.
Wolff makes a steel guide rod and recoil springs for the CZ 75/85. They are at www.gunsprings.com. The rod and springs are listed under a different make & model (TZ, I think, which is a "CZ clone").
I purchased the guide rod and three springs from them directly. The springs were less than, equal to, and greater than the listed factory value. However, since the guide rod is not full length, the low power spring doesn't sit very straight on it. I don't know if that is a problem, but I sounded funny to me.
Good luck.
I purchased the guide rod and three springs from them directly. The springs were less than, equal to, and greater than the listed factory value. However, since the guide rod is not full length, the low power spring doesn't sit very straight on it. I don't know if that is a problem, but I sounded funny to me.
Good luck.
Wolff makes a steel guide rod and replacement recoil springs for the CZ 75/85. They are at www.gunsprings.com. The rod and springs are listed under a different make & model (EAA and/or TZ, I think, which are "CZ clones").
Good luck.
Good luck.