Sonic cleaner for your suppressor

[badmatrix]

I have an Alaskan360.

Can’t be disassembled so it must be sonified.

What sonic device do you use? There are many on Amazon and you can spend hundreds or more on one. What works and lasts?

 

[dogtown tom]

Owners manual just recommends a brush and a little solvent, then rinse and dry.

Centerfire rifle silencers rarely need cleaning, but if you are shooting a lot of cast lead pistol, then you may need to increase your cleaning cycle.

A good read:https://www.silencershop.com/blog/post/cleaning-a-suppressor

 

[badmatrix]

Thank you, from the RUGGED SITE: Micro30™/Razor762™/Razor556™/Surge762™/Alaskan360™
Clean any visible buildup with a brass pick. The baffles aren’t removable, so wrap the tube in a rubber mesh and put it in an ultrasonic cleaner with 50% purple power and 50% warm water. Lubricate the locking collar with white lithium grease or gun oils.

Only reason i post to see what people use.

 

[Road_Clam]

My Dead Air Mask rimfire can gets so filthy with crud very quick. Ive learned to SS pin wet tumble the diffuser cones for about 3 hrs. Gets about 80-90% of the cones clean. Good enough and no hours of scrubbing and scraping carbon.