Snap Cap Jammed in Magazine

T

tyro

New member
Are snap caps not meant to be cycled through the magazine of a pump shotgun, just like a shot shell? I tried to begin such a process with Traditions brand snap caps. The first snap cap jammed (and remains stuck) in the mouth of the magazine, and so far I have not been able to dislodge it. I'm thinking about pushing a plastic tipped cleaning rod thourgh the other end to push the snap cap backwards out of the magazine mouth; but, since this demonstrates that my nom de plume is still apropos, I will await words of wisdom from those who are generous enough to offer them.
 
I had a similar problem once.

I took the "tube" apart to get it out (but not before poking my eye with the spring).

After this:

1. I only chamber the snap cap in my shotgun (never through the tube).

2. I always wear a goggle when dealing with springs.

Skorzeny

------------------
For to win one hundred victories in one hundred battles is not the acme of skill. To subdue the enemy without fighting is the supreme excellence. Sun Tzu
 
Most snap-caps, except for those orange training shells, won't cycle in a shotgun. They are too short. I had the same problem with my 870P. Remove the mag spring and maybe the trigger group to free the stuck "shell" Hope this helps.
 
Go in the other end of the mag,Tyro...
Unscrew the cap, watching out for that spring, and remove all of the parts. Once clear, the snap cap should be removable.

Funny, the Pachmayr caps I have have been through many 870s w/o a glitch.
 
Tyro --

I don't know the name of those orange training shells. But, I beleive, Brownells sells them. My range has them for all sorts of calibers. They're very cheap. But, keep in mind, these aren't snap caps. They will not cushion the firing pin.
 
I have six of those orange training shells -- the brand is Saf-T (at least that's what it says on the back).

It is true that they don't really cushion the firing pin. Unless your shotgun does not have a firing pin spring, I wouldn't worry about it.

Justin

------------------
Justin T. Huang, Esq.
late of Kennett Square, Pennsylvania
 
I'm not Dave, but I am familiar with the Pachmayr snap caps. The answer is YES, they do cushion the firing pin. The Pachmayr units incorporate a spring-loaded "contact pad".

That said, a buddy of mine returned his Pachmayr snap caps to the store after using them for one day. He said the rims got chewed up very easily. Never had that problem with my cheapo Saf-T orange shells.

Justin
 
These have the contact area as Justin said, and I used them for training at the agency, maybe been through varied 870s hundreds of times. Rim's intact, tho there are some rough spots...
 
You must log in or register to reply here.
Back
Top