SKS - Trigger Safety

D

dodgejw

Inactive
Hoping someone has encountered this before; following disassembly / reassembly of Yugu SKS M59/66A1, I can't release the trigger safety.

I've repeated disassembly to inspect trigger group / magazine, and all appears ok.

No other problems with reassembly.

Just cannot release trigger safety . . .

All suggestions appreciated!
 
Probably in the wrong position when you reassembled the trigger group. A little fuzzy on how it's done, but I remember the safety had to be either on or off when pulling it apart.
 
The instructions I have indicate the Safety is to be ON and hammer cocked when the trigger group assembly is removed, and remains in this configuration when re-assembled.

I have attempted with the Safety both ON and OFF, however.

The root-cause of the problem appears to be the Trigger Safety impinging on the Trigger Group lock-pin (the one which is depressed to remove the trigger group).

Has anyone encountered this before?
 
maybe this will help

tparts.jpg
 
You must log in or register to reply here.
Back
Top