SKS Needing a Triger Job

[FlyboyAZ]

I have a Romanian SKS with a very ratchety triger and it needs help. I can't seem to figure out how to take apart the triger assembly so I can't get in there and pollish out the parts. I saw a thread earlier that had a link to a company that will improve the triger on an SKS for about $40. It was a kind of mail in and two weeks later get the triger assembly back. If anyone has some SKS experiences I would appreciate the advice; which companies are good and which ones to stay away from. Thanks

 

[AR-10]

Check here for trigger info, specifically, the company that rebuilds them. you will have to do some searching, but you should find a post that gives the name of the place that does the work.

This will take you to a site that will show you how to disassemble and buff the trigger parts.

 

[Prof]

FlyboyAZ: I asked this same question on the SKS board that AR-10 has provided the link to. Evidently, the firm (The Machine Shop) that used to do the trigger jobs has stopped providing that service. A regular on the SKS board, Fragger, who is very knowledgable about these matters, has provided a description of how to perform your own trigger job. Go to the second page under "Genereal SKS Discussion" for the thread "Trigger Job".