My wife's Sig P250 sub-compact 9mm started failing to extract. The gun hasn't been fired much and has been loaded since last summer.
The case is either fully in the chamber with the next round pushed against it or half way out with the next round trying to feed. This is with both factory rounds and reloads.
I noted that the ones that do extract fall just to my right with some hitting my shoulder. I brought the gun home and cleaned it and lubricated it well then went right back and tried it. Same issue.
Now it's to disassembling the extractor, cleaning the channel well, lightly lubricating it and trying it again. Otherwise I need a new extractor spring. The thing is I can't find one. Other than going to SIG itself nobody offers it.
I'm going to call this company and see if they have one, they don't list any. They list them for every other SIG but not the P250.
http://www.topgunsupply.com/gun-par...arts-by-category/extractors-pins-springs.html
The case is either fully in the chamber with the next round pushed against it or half way out with the next round trying to feed. This is with both factory rounds and reloads.
I noted that the ones that do extract fall just to my right with some hitting my shoulder. I brought the gun home and cleaned it and lubricated it well then went right back and tried it. Same issue.
Now it's to disassembling the extractor, cleaning the channel well, lightly lubricating it and trying it again. Otherwise I need a new extractor spring. The thing is I can't find one. Other than going to SIG itself nobody offers it.
I'm going to call this company and see if they have one, they don't list any. They list them for every other SIG but not the P250.
http://www.topgunsupply.com/gun-par...arts-by-category/extractors-pins-springs.html