Im having issues working a load in MY M1 for 110 grain bullets.
I can never seem to get them to group very well. I know some people have had great success with them. Before I commit more of what it seems like dewidling resources “Primers and Powder.” I would Like some advice
Would you maybe change seating depth (sierra lists at 3.10) or do I need to go down or up in powder charge I have been around 49 to 51 grains of IMR 4895 been using Magnum Primers. I do not have access to a chronograph. I have been able to work up some great loads on 168 SMKS by just comparing groups . So I was hoping to do the same on the 110s
I almost think the 1/10 twist maybe to fast for these shorter projectiles, But was thinking maybe trying to slow the velocity down on them
Components,
Powder: IMR 4895
Bullet: sierra 2110
Case: Norma
Primer: CCI 250s
Case Trim Length 2.484
Thanks
Will
I can never seem to get them to group very well. I know some people have had great success with them. Before I commit more of what it seems like dewidling resources “Primers and Powder.” I would Like some advice
Would you maybe change seating depth (sierra lists at 3.10) or do I need to go down or up in powder charge I have been around 49 to 51 grains of IMR 4895 been using Magnum Primers. I do not have access to a chronograph. I have been able to work up some great loads on 168 SMKS by just comparing groups . So I was hoping to do the same on the 110s
I almost think the 1/10 twist maybe to fast for these shorter projectiles, But was thinking maybe trying to slow the velocity down on them
Components,
Powder: IMR 4895
Bullet: sierra 2110
Case: Norma
Primer: CCI 250s
Case Trim Length 2.484
Thanks
Will