shrouded muzzel break

bigted1956

Inactive
i have two rifles that previously wore little holes in the muzzel end of the barrel. they absolutly cut the felt recoil to a very pleasant meassure,,,however im a hunter and having ear protection on in the woods is not a remote possibility for me. i tryed these rifles without ear protection and the noise actually was painfull and so i cut the little holes off and recrowned the muzzel.

since then, i have found and read a little blurp about a shrouded muzzel break that directs the noise from the break to the front and away from the shooter and those at the shooters side.

question is , i cant find a comercially available muzzel break thus equiped. does anyone know if this is a 4-sale item or will i have to manufacture this and experiment myself?

thanks,

ted
 
howdy ted//I put a brake on mine and had the smith make me a crowned end cap also. works great, and it is much easier to run a patch through the barell with the brake screwed off. I just use a philips head screw-driver to put through the brake holes, and un screw it. hope it works out for you//charlie sierra:)
 
There are brakes that redirect the gases to the front, but the recoil reduction is less with this type of brake, and they are used mostly on smaller caliber rifles. I would seriously consider no brake at all, if I were you.

I would suggest a pair of North Sonic Ear Valves as ear plugs, they have a mechanism inside them that cuts off muzzle blast for a split second to protect your ears while hunting (these are not good for the range).
 
Back
Top