P post Inactive Sep 13, 1999 #1 I just bought a new spurless hammer sp 101 with the highly polished finish. How can I take off this shiney finish? It is too shiney, it almost shines in the dark. ------------------ walker
I just bought a new spurless hammer sp 101 with the highly polished finish. How can I take off this shiney finish? It is too shiney, it almost shines in the dark. ------------------ walker
H HS New member Sep 13, 1999 #2 Getting it bead blasted with the little plastic balls as used in panel shops for paint removal might do the trick ? ------------------ "The Gun from Down Under !" http://www.para1911fanclub.w3.to/ Alternate E-mail hs2k@email.com
Getting it bead blasted with the little plastic balls as used in panel shops for paint removal might do the trick ? ------------------ "The Gun from Down Under !" http://www.para1911fanclub.w3.to/ Alternate E-mail hs2k@email.com
T thequickad New member Sep 13, 1999 #3 Or go with the very durable non reflective NP3 finish by Robar.
P Porter New member Sep 13, 1999 #4 I'm thinking the SP101 has a slightly brushed or "burnished" finish. To match that type of finish, you need some 400 grit sand paper. Be gentle.
I'm thinking the SP101 has a slightly brushed or "burnished" finish. To match that type of finish, you need some 400 grit sand paper. Be gentle.