Savage barrel dimensions

W

WildWilly

Inactive
Can someone tell me the dimensions of a Model 10 Standard contour barrel as well as the dimensions of a Model 10 FP-SR Heavy Barrel .308. I want to take a wood stock from a model 10 GXP3 and re-channel the stock to fit the FP-SR and I need to know how much wood would need to be removed from the barrel channel. I have the FP-SR, but I do not have a GXP3 so I cannot measue it myself. I would appreciate any help or advice on the topic.
 
the standard barrel contour is on or around 0.585 at the tip and may vary slightly from year to year as to the degree of taper but should not as long as its within the turn of the century.
 
Without recommending that you pull out your calipers, the replacement barrel makers have settled on some standard contours for Savage barrels.

LINKY to McGowen barrels contour page. Scroll toward the bottom for Savage contours.

LINKY for Shilen barrels contour page.

Any number of vendors (Midway, Brownells) sell tools that will help you to fit the barrel to the stock.
 
You must log in or register to reply here.
Back
Top