I inherited a Savage 99 RS (with the Lyman Number 2 peep site). It's in beautiful condition, but I would like to find instructions on breakdown, cleaning and lubrication. It's been stored in a closet for the last 50 years so I probably need to blow out the cobwebs before firing it.
Savage 99 RS Disassembly and Cleaning
- Thread starter Krowe
- Start date
Jim Burton
New member
I found the following book quite helpfull.
The Gun Digest Book of Firearms Assembly/Disassembly: Centerfire Rifles
It is available from amazon.
I used my copy when I did a thorough cleaning of mine. It had not be completely disassembled for about 30 years and had collected quite a bit in the bottom of the magazine well. If you can't get the book perhaps I can get you the info from my copy.
Jim
The Gun Digest Book of Firearms Assembly/Disassembly: Centerfire Rifles
It is available from amazon.
I used my copy when I did a thorough cleaning of mine. It had not be completely disassembled for about 30 years and had collected quite a bit in the bottom of the magazine well. If you can't get the book perhaps I can get you the info from my copy.
Jim
Harley Nolden
Staff In Memoriam
I have sent, by separate email, the disassem instructions:
HJN
HJN
Mike Irwin
Staff
Do NOT disassemble the magazine assmebly!
I can't stress that strongly enough. They are VERY fiddly to get back together. Just flush it out with Gun Scrubber or brake parts cleaner.
I can't stress that strongly enough. They are VERY fiddly to get back together. Just flush it out with Gun Scrubber or brake parts cleaner.
jamescourson
Inactive
Could you all help me out please? I have a model 99 250-3000. I greatly need instructions on how to disassemble this rifle. HELP ME PLEASE!! 
jamescourson
Inactive
bump?